crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Turn the monitor facedown. 
- 
                     
            Unscrew the 5 screws holding the back cover on. 
 
- 
                     
            
- 
   
   - 
                     
            Take the edge tool or a metal ruler and insert it into the bezel. 
- 
                     
            Apply pressure and push down. 
- 
                     
            Do the same to the right side. 
- 
                     
            Once side of bezel facing you is decoupled, take the back cover and pry it loose. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage. 
- 
                     
            Pull the cord back and out of the way. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the Flat Flex Cables from the Power Button Circuit Board. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
