crwdns2915892:0crwdne2915892:0
Use this guide to replace the battery of your AYL SoundFit. If your device's battery won't hold a charge, replacing the battery may resolve the problem.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four hex screws on the top of the device using a 2.5 hex screwdriver.
-
-
-
Place a spudger between the black plastic cover and the green case.
-
Pry the black cover away from the main casing and remove the cover.
-
-
-
-
Place a spudger between the black housing, which contains the woofer, and the outer rubber casing.
-
Pry the housing away from the body to reveal the motherboard, speaker, and battery.
-
-
-
Remove the two Phillips #00 screws securing the battery casing.
-
Remove the battery case to reveal the battery.
-
-
-
Desolder the positive and negative battery contacts from the motherboard.
-
Remove the battery from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team 3-3, Harley Spring 2016 crwdns2935289:0IUPUI, Team 3-3, Harley Spring 2016crwdne2935289:0
IUPUI-HARLEY-S16S3G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
crwdns2947412:04crwdne2947412:0
Which battery is this, and what is the mAH?
3.7V 1500mAh, 5.55Wh
The charger works but it does not say chargeing
18650 battery
