crwdns2915892:0crwdne2915892:0
Use this guide to help you replace the Hard Drive. Don't forget to keep track of your screws.
crwdns2942213:0crwdne2942213:0
-
-
Slide the right lock button to the unlock position.
-
After it is unlocked, a red line will be visible.
-
-
-
Slide the left lock button into the unlock position and hold.
-
-
-
While holding the left lock button in the unlock position, push the battery from the center away from you.
-
-
-
-
Remove the two 9 mm Phillips head screws with the PH0 bit indicated by the red circles in the picture.
-
-
-
Once the screws are removed, slide the back panel away from the computer.
-
-
-
Remove the 9mm Phillips head screw in the left bottom corner of the hard drive with the PH0 bit.
-
-
-
Slide the hard drive to the left, unlocking it from its default position.
-
-
-
Pull the hard drive upwards and take it out of its position.
-
-
-
Remove two 3mm Phillips head screws, one located on each side of the metal casing holding the hard drive using the PH0 bit.
-
-
-
Pull upwards on the metal casing and it will come off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 4-3, Catania Fall 2015 crwdns2935289:0UMass Dartmouth, Team 4-3, Catania Fall 2015crwdne2935289:0
UMASSD-CATANIA-F15S4G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:08crwdne2935297:0
