crwdns2942213:0crwdne2942213:0
-
-
Using a Spudger, gently pry up the keyboard.
-
-
-
Rotate the keyboard to face downward.
-
Pull out the blue wiring connection. Use tweezers to make it easier to remove.
-
-
-
Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.
-
-
-
Slide the disk drive out of the device.
-
-
-
Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.
-
-
-
-
Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.
-
-
-
Pull up on the front panel using the spudger until the front panel separates from the bottom panel.
-
-
-
Unscrew and remove the marked screws.
-
-
-
Remove the motherboard from the device.
-
-
-
Unscrew the six screws using the Phillips #0 Screwdriver.
-
-
-
Unplug the fan's wires from the motherboard.
-
-
-
Remove the fan from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team S6-G2, Thompson Fall 2018 crwdns2935289:0University of North Texas, Team S6-G2, Thompson Fall 2018crwdne2935289:0
UNT-THOMPSON-F18S6G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2917034:0crwdne2917034:0
First step is wrong; attempting to prise out the keyboard will damage it. First step should be to remove the screws which hold in the keyboard.
