crwdns2915892:0crwdne2915892:0
If your battery is not holding charge or is completely dead, follow the guide to replace it.
crwdns2942213:0crwdne2942213:0
-
-
Turn the device over to where the back plate is facing up.
-
-
-
Use a Philips Head PH1 screwdriver to remove 10 screws (3 1cm screws and 7 .5cm screws) around the perimeter of the back plate.
-
-
-
-
Remove the back plate by lifting it straight up.
-
-
-
Remove 9 (.5 cm) phillips screws around the edge of the battery.
-
-
-
Lift up the battery to reveal the battery terminal.
-
-
-
Unclip the battery terminal by prying straight up on the sides of the connector to release the clip.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.