crwdns2915892:0crwdne2915892:0
This guide will tell you how to replace your hard drive, by opening up the bottom of the laptop. It is relatively simple, and only requires a screwdriver. Before doing this, you should back up all your information stored on the laptop.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over so you can see the battery.
-
-
-
Slide the lock on the right side of the battery to the right. If done correctly the slider will stay in place and there will be a red indicator.
-
-
-
Slide the other sliding lock on the left side of the battery to the left, and with your other hand slide the battery out from the laptop.
-
-
-
-
Remove the two 4mm Phillips #0 screws on either side of the laptop.
-
-
-
Slide the back panel towards you until it stops.
-
Lift the panel up out of the laptop casing.
-
-
-
Remove the four 3mm Phillips #0 screws holding the hard drive in place.
-
-
-
Disconnect the hard drive from the laptop by sliding it towards the outside edge.
-
-
-
Grab hold of the black cloth tab and pull the hard drive out from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.