crwdns2942213:0crwdne2942213:0
-
-
Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.
-
-
-
Remove adesive strips.
-
Disconnect the battery connectors by carefully pulling down on them using a spudger or plastic opening tool.
-
-
-
Disconnect Touch Connectors using a spudger or plastic opener tool.
-
Disconnect the ZIF connectors holding the battery.
-
-
-
Using a plastic opening tool carefully pry the battery loose. The battery is glued to the pad; slight pressure will be needed to remove the battery.
-
-
-
Disconnect cable
-
Remove the two Philips #0 screws from the power management board
-
Remove Philips #0 screw
-
-
-
-
Remove GPS antenna with a spudger.
-
Disconnect the connector
-
-
-
Remove the power and volume connector
-
-
-
Disconnect Earpiece connector
-
-
-
Remove the Display connector from motherboard.
-
-
-
Remove 4screw Philips #0 from motherboard
-
-
-
Inserisci qui la competenza.
-
-
-
Inserisci qui la competenza.
-
Per rimontare il dispositivo, segui queste istruzioni in ordine inverso.
Per rimontare il dispositivo, segui queste istruzioni in ordine inverso.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0