crwdns2915892:0crwdne2915892:0
Replacing lights in the rear of a Toyota Corolla is important as they communicate a driver's intent like stopping, turning, and reversing. With minimal tools every driver should become familiar with changing these lights to make sure they are being as safe as possible on the road. Replacing them also saves money and time for all drivers.
crwdns2942213:0crwdne2942213:0
-
-
Gently use a small pry bar or screw driver to loosen the cover.
-
-
-
Locate the two 10mm bolts that secure the bulb housing in place.
-
Using a socket wrench, extension, and 10mm socket, remove both bolts.
-
-
-
-
Remove the bulb housing by pulling directly back from the vehicle.
-
-
-
Twist counter clockwise to loosen the tail light bulb receptacle.
-
-
-
Pull the bulb receptacle out of the bulb housing.
-
-
-
Remove the non-functioning light bulb by pulling it from the bulb socket.
-
Insert the replacement bulb into the socket.
-
Don't forget to verify the new bulb is working before reassembling. To reassemble your device, follow these instructions in reverse order. The replacement of the bulb on the last step represents the apex of the repair process and following the steps in reverse order will return the tail light to full functionality.
Don't forget to verify the new bulb is working before reassembling. To reassemble your device, follow these instructions in reverse order. The replacement of the bulb on the last step represents the apex of the repair process and following the steps in reverse order will return the tail light to full functionality.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Arizona, Team 3-2, Cools Stephens Spring 2024 crwdns2935289:0University of Arizona, Team 3-2, Cools Stephens Spring 2024crwdne2935289:0
ARIZONA-COOLS STEPHENS-S24S3G2
crwdns2931471:02crwdne2931471:0
crwdns2935303:01crwdne2935303:0
