crwdns2915892:0crwdne2915892:0
The owner's manual recommends that your spark plugs are changed approximately every 30,000 miles.
crwdns2942213:0crwdne2942213:0
-
-
Use a flathead screwdriver to remove the two screws holding the engine cover in place.
-
Remove the engine cover.
-
-
-
Locate the four spark plug connectors.
-
Insert a screwdriver into the space in the wire connector and lift the lid.
-
-
-
Locate the bolt securing the ignition coil.
-
Use a wrench with a 10 mm socket to remove the bolt securing the ignition coil.
-
Once the bolt is removed, pull out the ignition coil.
-
-
-
-
Locate the old spark plug.
-
Use a wrench with a spark plug socket (with a rubber grommet) to unscrew the spark plug.
-
Once the spark plug is unscrewed, pull out the wrench along with the spark plug.
-
-
-
Ensure that the new spark plug is dry.
-
Use a gap measuring tool to ensure that the spark plug gap is appropriate.
-
-
-
Attach the new spark plug to the spark plug socket, and finger tighten the new spark plug.
-
Use the wrench to tighten the spark plug to 45 degrees.
-
Re-insert the ignition coil.
-
-
-
Use the wrench with the 10 mm socket to tighten the bolt that fastens the ignition coil.
-
Re-connect the wire connecter to the ignition coil.
-
Repeat steps for the remaining 3 spark plugs. Reattach the engine cover with the flathead screwdriver.
Repeat steps for the remaining 3 spark plugs. Reattach the engine cover with the flathead screwdriver.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
