crwdns2915892:0crwdne2915892:0
This guide is for base model Mazda 3 owners who need to replace their factory OEM door speakers.
Perform this repair while the car is off.
The speaker in this guide is a component speaker, so they do not require any wire cutting or soldering.
crwdns2942213:0crwdne2942213:0
-
-
Pry the door handle cover upwards using a flathead screwdriver.
-
Remove the cover to expose the screw.
-
-
-
Pull the door handle towards you.
-
Insert a small flathead screwdriver between the lock and the plate.
-
Pry the plate off by applying leverage away from the lock, exposing the second screw.
-
-
-
Remove both screws with a Phillips #1 screwdriver.
-
-
-
crwdns2935267:0crwdne2935267:0Heavy-Duty Spudger$4.99
-
Pry the door cover away from the frame using a heavy-duty spudger.
-
-
-
Push the switch panel out from the inside of the door cover.
-
Remove the wires connected to the panel by pressing the clips and pulling them outward.
-
Remove the door cover.
-
-
-
Use a Phillips #1 screwdriver to remove the four screws that secure the door speaker.
-
-
-
Remove the wires connecting the speaker by pressing the clip and pulling it outward.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0