crwdns2915892:0crwdne2915892:0
This is the perfect guide if you're looking to replace stock speakers with a nicer set, or if you've blown out your current speakers in your Mazda 6. Speakers are fairly easy to replace as long as you aren't completely rewiring the system.
crwdns2942213:0crwdne2942213:0
-
-
Pop open the hood and locate the battery.
-
Loosen the bolt on the positive terminal with the 10mm wrench.
-
Pull up and detach the terminal to disrupt power flow.
-
-
-
Pry open the screw cover on the inside of the handle with the small flathead screwdriver.
-
Unscrew the handle with the phillips screwdriver.
-
-
-
Pull the handle cover down and out of its pocket.
-
Slide the cover to the right off the handle.
-
Detach the tab on the back of the locking mechanism to completely remove the cover.
-
-
-
Peel off the rubber insert in the inner arm rest.
-
Unscrew the inner arm rest panel with the phillips screwdriver. This screw is holding the arm rest panel together.
-
-
-
Pry the power window switch case out of the arm rest with your flathead screwdriver.
-
Detach all tabs on the back of the switch case to remove completely.
-
-
-
-
Pop out the cover by the outside mirror to relieve door tension.
-
-
-
Pop out the door panel starting on the side closest to the door hinges.
-
-
-
Use a flathead screwdriver to press the clip holding the light from the back of the door and pull the lightbulb out.
-
-
-
Lift the door panel up and out to remove.
-
-
-
Unscrew four bolts holding the speaker with the ratchet.
-
Pull out the speaker.
-
Detach the connector in the back.
-
-
-
Cut and strip the wires that were connected to the speaker.
-
-
-
Splice the wires from the door to the new speaker's wires making sure to connect the correct wire polarity. (The small connector wire from the speaker is positive.)
-
Cover and crimp the wires with the butt-end connectors.
-
-
-
Insert the new speaker and screw into place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team S27-G3, Crane Winter 2018 crwdns2935289:0Eastern Washington University, Team S27-G3, Crane Winter 2018crwdne2935289:0
EWU-CRANE-W18S27G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
crwdns2947410:01crwdne2947410:0
the passenger side is completely different
