crwdns2915892:0crwdne2915892:0
Use this guide to replace a passenger side mirror on a 2002-2006 Toyota Camry, USA built model.
Side view mirrors are mirrors on the exterior of the vehicle. They are designed to assist the driver’s view of what is behind or beside their vehicle. When damaged, the mirror’s reflective surface can be distorted and may no longer adjust properly.
In step 4 of this guide, you will be loosening the three 10mm bolts to remove the passenger side mirror. The three bolts are keeping the side mirror mounted to the car, so make sure you have a firm grip on the side mirror before loosening them. If the side mirror is dropped the glass may shatter or the car may get scratched. Use the same caution on step 6 when you mount the replacement side mirror.
crwdns2942213:0crwdne2942213:0
-
-
Remove the trim paneling located at the base of the side view mirror.
-
-
-
Begin to disconnect the electrical connector located in the center of the three 10mm bolts.
-
You can find the lock pad by locating the release tab on the top of the electrical connector.
-
Use your flat head screwdriver to push in on the lock pad. Then, press in on the electrical connector
-
-
-
-
Detach the electrical connecter completely. Place your flathead screwdriver in the gap to gain leverage and pull on the connector.
-
-
-
Remove the three 10mm bolts using your 10mm socket and ratchet extension.
-
-
-
Mount the replacement side view mirror.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0