crwdns2915892:0crwdne2915892:0
This guide shows the process of replacing a hatch strut on a 2002-2006 Acura Integra (DC5 or RSX). A hatch strut, also referred to as a hatch lift support, is a vital component to keeping the hatch of a vehicle open. As they age and become worn out they’ll no longer function properly. In cold temperatures a worn hatch strut may even fail to keep the hatch open.
All that is needed are a replacement hatch strut, a 12mm wrench, and a crescent wrench. There is a wide variety of aftermarket hatch struts for this vehicle and there is no electrical work required for this fast fix. This guide utilizes a Monroe Max-Lift Lift Support. (Part Number: 900077) but any compatible replacement will suffice. It is recommended to have a helper stand by to hold the weight of the hatch or to safely prop it open during the replacement process. A simple fix like this can save you the time and money of going to a repair shop and helps build basic auto maintenance skills.
crwdns2942213:0crwdne2942213:0
-
-
Acquire a compatible hatch strut (lift support). This guide uses a Monroe Max-Lift Lift Support. (Part Number: 900077)
-
-
-
Go to the rear of the vehicle.
-
Pull up on the trunk handle to lift open the trunk.
-
-
-
Remove the upper ball mount.
-
Turn the upper ball mount counterclockwise with a 12mm wrench.
-
-
-
-
Remove the lower ball mount.
-
Turn the lower ball mount counterclockwise with a 12mm wrench.
-
-
-
Place a washer on the new upper ball mount.
-
Turn it clockwise to hand tighten the new upper ball mount.
-
Turn it clockwise with the crescent wrench to finish tightening.
-
-
-
Place a washer on the new lower ball mount.
-
Turn it clockwise to hand tighten the new lower ball mount.
-
Turn it clockwise with a crescent wrench to finish tightening the new lower ball mount.
-
-
-
Place a lower hatch strut socket over the new lower ball mount.
-
Push it firmly onto the new lower ball mount. It will pop on easily.
-
-
-
Place the upper hatch strut socket over the new upper ball mount.
-
Press it firmly onto the new upper ball mount. It will pop on easily.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team S2-G9, Munoz Fall 2019 crwdns2935289:0Eastern Washington University, Team S2-G9, Munoz Fall 2019crwdne2935289:0
EWU-MUNOZ-F19S2G9
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
