crwdns2915892:0crwdne2915892:0
Replacing burnt out or broken bulbs is a quick and easy fix that makes your car easier to see from behind, helping to prevent accidents.
crwdns2942213:0crwdne2942213:0
-
-
Locate the plastic casing that holds the trunk liner in place, directly behind the tail light.
-
Unscrew the plastic casings.
-
-
-
Unscrew the three plastic wing nuts located behind the tail lights.
-
-
-
Carefully pull the tail light away from the car to expose the connected wires.
-
-
-
-
Unclip the rear panel of the tail light assembly. There are two clips on the top and two on the bottom.
-
Remove the rear panel from the rest of the assembly.
-
-
-
Grab the plastic base of the bulb and gently wiggle it free.
-
-
-
Gently push the new bulb into the plastic housing.
-
-
-
After putting the new bulbs in, turn the desired lights on to check that the newly installed bulbs work correctly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0