crwdns2915892:0crwdne2915892:0
Use this guide to replace the power cord on a 1922 GE AOU fan.
crwdns2942213:0crwdne2942213:0
-
-
Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.
-
Take the bottom plate off the fan and set it aside.
-
-
-
Remove the three number 8 screws that hold the switch in place.
-
-
-
-
Remove the switch, carefully sliding the speed lever out of its slot.
-
-
-
Once the switch is free, unscrew the two knurled nuts holding the wires in place.
-
-
-
Turn the switch over and unscrew the nut securing the wire with the 5/16 crescent wrench.
-
-
-
Remove the switch and set it aside, then pull the wire through the grommet.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2917034:0crwdne2917034:0
Westinghouse table fan needs new cord (just bought). 18 gauge cord? Where to buy?