Pearl Abrasive Tile Saw PA7PROIR

The Pearl Abrasive PA7PROIR is a professional-grade wet tile saw built for cutting ceramic, porcelain, and stone with both accuracy and durability. The saw is equipped with a 1-horsepower motor, a 7 inch diamond blade on a 5/8 inch arbor, and a no-load speed of 6,000 rpm. Major components include a cast-aluminum cutting table with a bonded rubber surface, a stainless-steel water tray with a submersible pump, a steel frame with guide rollers, and adjustable fences for straight and diagonal cuts. With a rip capacity up to 20 inches and a diagonal capacity of 14 inches, it’s versatile enough to take on both standard tiles and the larger formats that became popular in the 2000s.

Pearl introduced the PA7PROIR in the early 2010s as part of its tile saw lineup. It was marketed as a rental-tough, designed for tough work saw, and the “IR” designation is sometimes taken to refer to its “industrial rental” durability package. The model filled the gap between Pearl’s compact tabletop saws and larger rail saws, offering portability without sacrificing cut quality. Though exact sales numbers aren’t publicly available, the saw was distributed widely across North America and is commonly found in rental fleets, which speaks to its durability and broad adoption. Pearl’s website no longer promotes this model directly; however, support manuals remain available, suggesting it has been discontinued in favor of newer designs such as the PA7PRO.

It was retailed in the $600–$800 range, depending on vendor and accessories. Its value came from providing features usually reserved for bigger saws, like a precision cutting table, adjustable guides, and a water cooling system in a unit weighing only 67lbs. Users often praised its balance of portability and ruggedness, though some noted that the water pump and table rollers were common wear points requiring replacement

The Pearl Abrasive PA7PROIR is a wet tile saw that can be recognized by its 7-inch blade housed inside a compact steel frame with a stainless steel water tray below the cutting area. The saw sits on a rectangular-shaped base and features a cast aluminum cutting table (about 14" × 15") with a bonded black rubber mat designed to grip tile securely. A ruler guide and adjustable rip fence are attached to the table, and some units may include a miter block for angled cuts. The overall machine measures about 33 inches long, 19.5 inches wide, and 17.6 inches tall, weighing around 67 pounds.

A way to distinguish the PA7PROIR from similar models is its size and motor rating. Unlike other rail saws, this model uses a 1-horsepower induction motor with a direct-drive 7-inch blade, making it smaller and lighter but still capable of handling rip cuts up to 20 inches. The stainless steel water tray and a submersible water pump also help identify this particular model compared to more entry-level tabletop saws.

The model number “PA7PROIR” is usually printed on a label added to the saw’s housing or motor assembly. Users can also confirm the model by checking the included manual, which lists “Pearl Abrasive PA7PROIR Wet Tile Saw” on the cover. If you’re uncertain whether your saw is this exact model, the key identifiers are the 7-inch blade size, steel and aluminum construction, stainless water tray, and mid-range cutting capacity (20-inch rip / 14-inch diagonal).

• Motor: 1-horsepower induction motor.
• Voltage / Power: 115 volts, 60 Hz, draws 9.4 amps.
• No-load speed: 6000 rpm
• Blade Size: 7-inch blade with a 5/8-inch arbor.
• Cut Capacity:
  • Rip cut: up to 20 inches.
  • Diagonal cut: up to 14 inches.
• Max Cutting Depth: 1.9in
• Cutting Table: Cast aluminum, approx. 14-inches by 15-inches surface, with a rubber mat bonded on top to help with grip and reduce slip.
• Guide/Fence System: This system comes with a ruler guide and a rip guide. An optional add-on includes a miter block for making angled cuts.
• Water Tray & Pump: Stainless steel water tray with drain; pump included to keep the blade cooled.
• Frame & Build: Steel frame with rails, guide rollers, etc. Designed for rugged work.
• Weight: 67lbs
• Overall Dimensions (L x W x H): 33 in × 19.5 in × 17.6 in
• Electrical & Safety
  • Equipped with a GFCI safety plug
  • Twist lock plug, 15A / 125V
  • Extension cord limit: max 50 ft
  • Correct gauge cords to prevent a drop
  • The drip loop prevents water from entering the outlet
• Guides & Adjustments
  • Table alignment tolerance: 0.1 mm
  • Shim rollers to correct misalignment
  • Table leveling via roller plate loosening
• Accessories
  • Optional miter block (part S1000-34)
  • Universal saw stand (part V35010-UV)
  • Multiple replacement parts available
• Maintenance & Operation
  • Bearings are sealed and lubricated
  • Pump impeller requires clog checks
  • Run the blade idle after long cuts
  • Avoid solvents or hot cleaning liquids
  • Retighten screws after cleaning use
  • Drain the tray water before storage
• Parts & Components
  • Drain plug on the water tray
  • Blade guard with adjustment knob
  • Steel frame and cast aluminum parts

• PA7PROIR-Rental-Manual-0922.pdf: this contains specs, features, symbols, etc.
• No other sources found