Meltio M600 Repair

The Meltio M600 is the second generation industrial metal 3D printer designed by Meltio for high-performance, high-reliability production. It features blue laser diode technology, a larger build volume than the standard M450, and a fully inert atmosphere chamber for superior material quality.

The Meltio M600 features blue laser diode technology, which offers distinct advantages over traditional infrared lasers for metal 3D printing. Blue lasers, operating at a shorter 450 nm wavelength, are significantly more efficient at interacting with reflective metals like copper and aluminum. This enhanced absorption results in better energy transfer, reduced spatter, and a more stable melt pool, which leads to higher-quality, denser parts with smoother surface finishes. Blue lasers also allow for lower power consumption and improved process control, making the M600 both more effective and energy-efficient than the previous M450.

• Full Dimensions:
  • Width: 41.34 in (1050 mm)
  • Depth: 41.34 in (1050 mm)
  • Height: 76.77 in (1950 mm)
• Print Volume:
  • Width: 11.81 in (300 mm)
  • Depth: 15.75 in (400 mm)
  • Height: 23.62 in (600 mm)
• System Weight (Depending on Options): lb (800 - 1000 kg)

• Laser Type: 9x Direct Diode Lasers
• Head Type: Multi-laser Deposition Head
• Laser Wavelength: 450 nm (Blue)

• Compatible Power Input:
  • 400V Three Phase
• Peak Power Consumption: 4 - 6 kW (Dependent on Print Material)

• Wire Feedstock Diameter: 0.8 - 1.2 mm
• Wire Feedstock Spool: BS300 or Wire drums
• Process Control: Closed-loop, laser and wire modulation
• Movement System: Servo Motor Linear axis with Absolute encoder on all axis
• Print Enclosure: Laser-safe, sealed, controlled atmosphere
• Filtration System: 3 Stage Particulate and Chemical Filtration
• Environment Control: Control O2 and Humidity level
• Cooling: Active water-cooled chiller
• Touch Probe: Automated XYZ Touch Probe integrated
• Compatable Materials:
  • Stainless Steels
  • Mild Steels
  • Carbon Steels
  • Titanium Alloys
  • Nickle Alloys
  • Copper & Aluminum

• Interface:
  • USB
  • Ethernet

• Hot Wire: Programmable power supply that preheats the material to increase the deposition rate.
• Dual Wire: This option allows to 3D print two wire materials sequentially with very quick wire switches.
• Quad Wire: This option allows for sequential 3D Printing of up to four materials with very fast automatic wire switches.
• Laser Alignment System: It allows users to calibrate Meltio’s multi-laser deposition head accurately and effortlessly prior to every print.

• Official Product page