Klein USB Digital Meter ET920 Repair

This device can be used to test to verify the voltage from USB-A & USB-C ports along with the current being drawn and the watt-hours of a device plugged into it.

NOTE: This will measure voltage on a USB-A port with no load attached but it must have a USB-C load attached to check a USB-C port.

• 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
• Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
• Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
• Store and recall up to 10 readings
• Voltage and current overload detection
• Hi-resolution LCD for clear visibility in environments with low ambient lighting
• Device must be used in line between source being measured and power source
• Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
• Built to withstand a 6.6-Foot (2m) drop
• No batteries needed; powered by the USB port being tested