Not sure if a calibration will work on your model. According to the tech sheet (see p.4 in tech sheet below) it only applies to models that do not have level selection. The owner manual for your model shows that you can select the soil level i.e. light, medium or heavy.
Could be a shifter fault.
Here's the [document|32626|tech sheet] for the washer.
Go to p.2 to view the procedure for how to activate the ''diagnostic test modes'' and check what error code is being displayed.
There's a ''Fault/error code method display'' chart on p.3 that shows how to interpret the status lights to work out the code.
If it is an F7 E5 error go to p.7 to see the possible cause and what to check.
-
If you find the problem and it is a faulty part that needs replacing, Here's the [https://www.searspartsdirect.com/model/tt7fut67yf-000582/kenmore-1105142510-washer-parts|parts list] that is useful. Locate the wanted part in the list and note the part number that is shown with it. Search online for the ''part number only,'' to find suppliers that suit you best.
+
If you find the problem and it is a faulty part that needs replacing, Here's the [link|https://www.searspartsdirect.com/model/tt7fut67yf-000582/kenmore-1105142510-washer-parts|parts list] that is useful. Locate the wanted part in the list and note the part number that is shown with it. Search online for the ''part number only,'' to find suppliers that suit you best.
If you search on YouTube for ''(insert wanted part number) replacement,'' sometimes if you're lucky there are videos that show how to remove/replace the part.
Hi @timgrose
Could be a shifter fault.
Here's the [document|32626|tech sheet] for the washer.
Go to p.2 to view the procedure for how to activate the ''diagnostic test modes'' and check what error code is being displayed.
There's a ''Fault/error code method display'' chart on p.3 that shows how to interpret the status lights to work out the code.
If it is an F7 E5 error go to p.7 to see the possible cause and what to check.
If you find the problem and it is a faulty part that needs replacing, Here's the [https://www.searspartsdirect.com/model/tt7fut67yf-000582/kenmore-1105142510-washer-parts|parts list] that is useful. Locate the wanted part in the list and note the part number that is shown with it. Search online for the ''part number only,'' to find suppliers that suit you best.
If you search on YouTube for ''(insert wanted part number) replacement,'' sometimes if you're lucky there are videos that show how to remove/replace the part.