So the story behind this, is that I ordered a replacement screen and did the whole process and I've done some of these before with no issues. But when I tried powering it on AT FIRST I got a blue light pop sound, so I reseated the top screen ribbon cable and tried turning it back on, but NOW, I am not getting any light at all from it.
I noticed the 53 pin ribbon cable connector, on the middle left side of the motherboard, looks like one of the pins is gone (picture below), but I am not 100% sure if it is just like that or not. I would just like a second opinion on all of this.
Here's some things I ruled out:
I did not put the battery in backwards I know that for a fact.
I tested with my multimeter and do get power from the daughter board to the main motherboard.
+
F1 and F2 Fuse are good
+
And the power button was tested with my multimeter and works.
So the story behind this, is that I ordered a replacement screen and did the whole process and I've done some of these before with no issues. But when I tried powering it on AT FIRST I got a blue light pop sound, so I reseated the top screen ribbon cable and tried turning it back on, but NOW, I am not getting any light at all from it.
I noticed the 53 pin ribbon cable connector, on the middle left side of the motherboard, looks like one of the pins is gone (picture below), but I am not 100% sure if it is just like that or not. I would just like a second opinion on all of this.
Here's some things I ruled out:
I did not put the battery in backwards I know that for a fact.
I tested with my multimeter and do get power from the daughter board to the main motherboard.
And the power button was tested with my multimeter and works.
[image|3608249]