I can't find the service data sheet (Frigidaire p/n A13707601) for your model (look behind the kick plate perhaps) to confirm, but try the following to see if you can reset the machine.
-
Not sure if you tried this or not but try a power cycle to see if it resets the control board. Disconnect the power to the dishwasher (either unplug it from the wall outlet or remove the appropriate fuse or trip the breaker in the house power box), wait 5 minutes then reconnect the power and check
+
Not sure if you tried this or not but try a power cycle to see if it resets the control board. Disconnect the power to the dishwasher (either unplug it from the wall outlet or remove the appropriate fuse/trip the breaker, in the house power box), wait 5 minutes then reconnect the power and check
With the power connected and the door closed, ''press and hold'' the Start/Cancel button for 3-4 seconds and release. Hopefully the machine will start to drain and then once it has drained, the drain pump will stop and the machine will be ready for the next time
I can't find the service data sheet (Frigidaire p/n A13707601) for your model (look behind the kick plate perhaps) to confirm, but try the following to see if you can reset the machine.
+
+
Not sure if you tried this or not but try a power cycle to see if it resets the control board. Disconnect the power to the dishwasher (either unplug it from the wall outlet or remove the appropriate fuse or trip the breaker in the house power box), wait 5 minutes then reconnect the power and check
With the power connected and the door closed, ''press and hold'' the Start/Cancel button for 3-4 seconds and release. Hopefully the machine will start to drain and then once it has drained, the drain pump will stop and the machine will be ready for the next time
Hi @chancemastel
I can't find the service data sheet (Frigidaire p/n A13707601) for your model (look behind the kick plate perhaps) to confirm, but try the following to see if you can reset the machine.
With the power connected and the door closed, ''press and hold'' the Start/Cancel button for 3-4 seconds and release. Hopefully the machine will start to drain and then once it has drained, the drain pump will stop and the machine will be ready for the next time