Okay, if you're willing to play along and try out a few things, I think we might have a path to a solution here.
* Unplug anything from the rear port of the power station.
* Press together and hold the power button + knob button down for at least 10 seconds. Release. This will perform a "hard shutdown" of the device.
* Press and hold the knob button, and, keeping the knob pressed down, plug the power station into the computer. This should put the device into DFU (Device Firmware Update) mode, and you should hear a chime that a USB device has connected to the computer. Release the knob button. The screen on the Power Station will stay blank.
* If the above steps don't work the first time, try following them again. It can be hard to tell if the device is already on or off when you start.
* Go to [link|http://www.ifixit.com/fixhub/console|www.ifixit.com/fixhub/console|new_window=true] and follow the prompts to connect to your Power Station. Select "upload firmware" and select "upgrade now". The device ''should'' follow the firmware update process and boot properly afterwards.
If the above steps don't work the first time, give it another try (or two).
+
+
=== Update (01/08/25) ===
+
+
Hi! It looks like you've found a pretty serious bug in our firmware update process. We're working on a fix right now, and we should have you back online pretty soon. For the time being, we've removed version 1.0.7 from the fw upgrade list. Please be sure to reach out to support@ifixit.com so we can keep track of your case and make sure that you're taken care of.
Okay, if you're willing to play along and try out a few things, I think we might have a path to a solution here.
* Unplug anything from the rear port of the power station.
* Press together and hold the power button + knob button down for at least 10 seconds. Release. This will perform a "hard shutdown" of the device.
* Press and hold the knob button, and, keeping the knob pressed down, plug the power station into the computer. This should put the device into DFU (Device Firmware Update) mode, and you should hear a chime that a USB device has connected to the computer. Release the knob button. The screen on the Power Station will stay blank.
* If the above steps don't work the first time, try following them again. It can be hard to tell if the device is already on or off when you start.
* Go to [link|http://www.ifixit.com/fixhub/console|www.ifixit.com/fixhub/console|new_window=true] and follow the prompts to connect to your Power Station. Select "upload firmware" and select "upgrade now". The device ''should'' follow the firmware update process and boot properly afterwards.
If the above steps don't work the first time, give it another try (or two).