[image|3458819]
I picked up a second hand Starbucks Barrister today and spent the whole day troubleshooting it ;( SOS
At first the pump was running but no shot was pulling. I pulled the machine apart, cleaned the pump and cleaned the boiler. Before assembling the machine properly I tested it , pump was working and both the wand and portafilter had hot water coming out. However, once I put the pump into its holster and reassembled the machine properly the PUMP STOPPED WORKING. I troubleshot the pump individually (running separate wires to it) and it is working, pumping water and all but once assembled inside the machine it’s not going.
The connections and wires visually seem good and wiring is in place as it was as I took plenty of photos
Any idea what troubleshooting I could do next?
[image|3458819]
I picked up a second hand Starbucks Barrister today and spent the whole day troubleshooting it ;( SOS
At first the pump was running but no shot was pulling. I pulled the machine apart, cleaned the pump and cleaned the boiler. Before assembling the machine properly I tested it , pump was working and both the wand and portafilter had hot water coming out. However, once I put the pump into its holster and reassembled the machine properly the PUMP STOPPED WORKING. I troubleshot the pump individually (running separate wires to it) and it is working, pumping water and all but once assembled inside the machine it’s not going.
The connections and wires visually seem good and wiring is in place as it was as I took plenty of photos
Any idea what troubleshooting I could do next?