Be sure to check the battery if it's can deliver 3v power which is located at the front panel (where the controller ports are).
+
Be sure to check the battery if it still can deliver 3v power which is located at the front panel (where the controller ports are).
If this one is empty, then you do need to replace it and see if that solved the issue.
For the DOL-001 you do need to solder the battery out and solder a new one in. For the DOL-101 you can just replace the cell battery by removing the old one from the bracket and put a new one in.
Guide (DOL-001, which is the most common one) > [guide|1400]
Hi!
Be sure to check the battery if it's can deliver 3v power which is located at the front panel (where the controller ports are).
If this one is empty, then you do need to replace it and see if that solved the issue.
For the DOL-001 you do need to solder the battery out and solder a new one in. For the DOL-101 you can just replace the cell battery by removing the old one from the bracket and put a new one in.
Guide (DOL-001, which is the most common one) > [guide|1400]
If you have any questions, please let us know!