Check that it isn't a broken duct door that is the problem and not the duct door motor.
Not totally sure but run Service Diagnostic ''test 00 43 cycle duct door'' as shown in the [document|32672|mini manual] to see if it opens and closes.
-
If this isn't the correct test or if it is and the door doesn't open, on p.3 of the manual (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door motor (185 Ohms) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [link|https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
+
If this isn't the correct test or if it is and the door doesn't open, on p.3 of the manual (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door motor (185 Ohms) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for [link|https://www.ifixit.com/products/wr60x10344-ge-refrigerator-motor|WR60X10344|new_window=true] to find suppliers that suit you best. Here's a [link|https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
-
Here's a [link|https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace the ice duct door if it is the problem. Search online for ''WR17X13241'' to find suppliers that suit you best.
+
Here's a [link|https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace the ice duct door if it is the problem. Search online for [link|https://www.ifixit.com/products/wr17x13241-ge-refrigerator-ice-chute-door-cover|WR17X13241|new_window=true] to find suppliers that suit you best.
Check that it isn't a broken duct door that is the problem and not the duct door motor.
Not totally sure but run Service Diagnostic ''test 00 43 cycle duct door'' as shown in the [document|32672|mini manual] to see if it opens and closes.
-
If this isn't the correct test or if it is and the door doesn't open, on p.3 of the (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door motor (185 Ohm) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [link|https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
+
If this isn't the correct test or if it is and the door doesn't open, on p.3 of the manual (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door motor (185 Ohms) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [link|https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
Here's a [link|https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace the ice duct door if it is the problem. Search online for ''WR17X13241'' to find suppliers that suit you best.
Have you checked that it isn't a broken duct door that is the problem and not the duct door motor?
+
Check that it isn't a broken duct door that is the problem and not the duct door motor.
-
Here's a [https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace it if it is the problem. Search online for ''WR17X13241'' to find suppliers that suit you best.
+
Not totally sure but run Service Diagnostic ''test 00 43 cycle duct door'' as shown in the [document|32672|mini manual] to see if it opens and closes.
-
If the duct door is OK, here's the [document|32672|mini manual] for the model that may help.
+
If this isn't the correct test or if it is and the door doesn't open, on p.3 of the (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door motor (185 Ohm) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [link|https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
-
There appears to be no diagnostic test for the duct door, (at least none that I could see in the manual) but on p.3 (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door solenoid (185 Ohm) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.
+
Here's a [link|https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace the ice duct door if it is the problem. Search online for ''WR17X13241'' to find suppliers that suit you best.
Hi @vincentc15332
Have you checked that it isn't a broken duct door that is the problem and not the duct door motor?
Here's a [https://www.youtube.com/watch?v=Hn-Fj9AVfXM|video] that shows how to replace it if it is the problem. Search online for ''WR17X13241'' to find suppliers that suit you best.
If the duct door is OK, here's the [document|32672|mini manual] for the model that may help.
There appears to be no diagnostic test for the duct door, (at least none that I could see in the manual) but on p.3 (see diagram for Model PFE28K, PYE22K, PFH28, DYE22, DFE28) it shows that the duct door solenoid (185 Ohm) is connected between connector pins J3/7 and J3/15 of the door board. If the motor is faulty search online for ''WR60X10344'' to find suppliers that suit you best. Here's a [https://www.youtube.com/watch?v=HJrYcRvP0go|video] that shows how to replace the motor.