Here's the [document|32660|mini manual] for the washer that may help.
It shows how to get into the service mode so that you can manually check the operation of the pump (cycle selector knob position #9).
If you have a DMM (digital multimeter) disconnect the power to the washer and check if there's continuity through the pump motor windings
If the pump is OK the manual also shows the electrical operate path for the pump that may help in case it is a faulty control board or a wiring problem.
-
''***Be safety aware:*** When the power is turned on to the washer, according to the manual there's 120V AC on one side of the drain pump at all times as it is switched on and off by the control board, connecting the Neutral return path to the pump''
+
''***Be safety aware:*** When the power is turned on to the washer, according to the manual there's 120V AC on the drain pump at all times as it is switched on and off by the control board, connecting the Neutral return path to the pump''
Here's the [document|32660|mini manual] for the washer that may help.
It shows how to get into the service mode so that you can manually check the operation of the pump (cycle selector knob position #9).
If you have a DMM (digital multimeter) disconnect the power to the washer and check if there's continuity through the pump motor windings
If the pump is OK the manual also shows the electrical operate path for the pump that may help in case it is a faulty control board or a wiring problem.
-
''***Be safety aware:*** When the power is turned on to the washer, according to the manual there's 120V AC on the drain pump at all times as it is switched on and off by the control board, connecting the Neutral return path to the pump''
+
''***Be safety aware:*** When the power is turned on to the washer, according to the manual there's 120V AC on one side of the drain pump at all times as it is switched on and off by the control board, connecting the Neutral return path to the pump''
Here's the [document|32660|mini manual] for the washer that may help.
It shows how to get into the service mode so that you can manually check the operation of the pump (cycle selector knob position #9).
-
It also shows the electrical operate path for the pump that may help in case it is a faulty control board or a wiring problem.
+
If you have a DMM (digital multimeter) disconnect the power to the washer and check if there's continuity through the pump motor windings
+
+
If the pump is OK the manual also shows the electrical operate path for the pump that may help in case it is a faulty control board or a wiring problem.
+
+
''***Be safety aware:*** When the power is turned on to the washer, according to the manual there's 120V AC on the drain pump at all times as it is switched on and off by the control board, connecting the Neutral return path to the pump''
Hi @jedwards40728
Here's the [document|32660|mini manual] for the washer that may help.
It shows how to get into the service mode so that you can manually check the operation of the pump (cycle selector knob position #9).
It also shows the electrical operate path for the pump that may help in case it is a faulty control board or a wiring problem.