***R15 Replacement***
Used 1206 1/4W (R15 in pic) and worked but slightly bigger than original which is probably 0805 (R17). Note I have a hot air station to solder on the bigger resistor. If soldering iron probably can't get heat on the solder so best go with 0805
[image|3242253]
***Dead LED***
Also found a dead LED (5630 3v) on W10515057 board. Couldn't find the matching + - pattern replacement so soldered masked off one - and soldered on a standard LED with + - on either end.
[image|3242255]
[image|3242254]
Used hot air station to solder on the heat sink contact under the LED. Probably not possible with soldering iron
***Conformal Coating***
Put on conformal coating (over the resistor and around the LED) to seal off moisture. Lets see how long these fixes last :)