Here's the [link|https://mastersamuraitech.com/wp-content/uploads/2015/05/Samsung-WA50F9A-Top-Load-Washer-Fast-Track.pdf|fast track troubleshooting guide] for the WA50** series washers.
Run the ''Quick test mode'' as described and check if the water level sensor is OK. If it is faulty ii will show a 1E error code and perhaps an OE code as well.
-
Also check that the hose hasn't become disconnected from the switch or the hose connection to the tub - see 6:10 minutes into the video linked below.
+
Check that the water level sensor hose isn't kinked or blocked etc and that it hasn't become disconnected from the switch or the hose connection to the tub - see 6:10 minutes into the video linked below.
If the switch is faulty, here's a [link|https://www.youtube.com/watch?v=Y5x9kjcCyk8|video] that shows how to replace it. Search online for ''DC96-01703H'' to find suppliers that suit you best.
Here's the [https://mastersamuraitech.com/wp-content/uploads/2015/05/Samsung-WA50F9A-Top-Load-Washer-Fast-Track.pdf|fast track troubleshooting guide] for the WA50** series washers.
+
Here's the [link|https://mastersamuraitech.com/wp-content/uploads/2015/05/Samsung-WA50F9A-Top-Load-Washer-Fast-Track.pdf|fast track troubleshooting guide] for the WA50** series washers.
-
Run the ''Quick test mode'' as described and check if the water level sensor is OK. If it is faulty is will show a 1E error code and perhaps an OE code as well.
+
Run the ''Quick test mode'' as described and check if the water level sensor is OK. If it is faulty ii will show a 1E error code and perhaps an OE code as well.
Also check that the hose hasn't become disconnected from the switch or the hose connection to the tub - see 6:10 minutes into the video linked below.
-
If the switch is faulty, here's a [https://www.youtube.com/watch?v=Y5x9kjcCyk8|video] that shows how to replace it. Search online for ''DC96-01703H'' to find suppliers that suit you best.
+
If the switch is faulty, here's a [link|https://www.youtube.com/watch?v=Y5x9kjcCyk8|video] that shows how to replace it. Search online for ''DC96-01703H'' to find suppliers that suit you best.
Hi @chandni65319
Here's the [https://mastersamuraitech.com/wp-content/uploads/2015/05/Samsung-WA50F9A-Top-Load-Washer-Fast-Track.pdf|fast track troubleshooting guide] for the WA50** series washers.
Run the ''Quick test mode'' as described and check if the water level sensor is OK. If it is faulty is will show a 1E error code and perhaps an OE code as well.
Also check that the hose hasn't become disconnected from the switch or the hose connection to the tub - see 6:10 minutes into the video linked below.
If the switch is faulty, here's a [https://www.youtube.com/watch?v=Y5x9kjcCyk8|video] that shows how to replace it. Search online for ''DC96-01703H'' to find suppliers that suit you best.