@joelvanbeek try the service code on your camera to see if there is an error code. Make sure that after your work on your camera, that both Flex cables are properly re-connected and that the mainboard is free of any corrosion etc. Also make sure that you check the connectors for the flex cables. Remove the cables and then restart them. Check the ends for any tears etc. Here is the SM [document|31925] that will help you with the diagnostic as well as the service for your camera. Let us know what you find.
-
Tehre is of course always a possibility that this is Firmware related, but check the parts etc. first.
+
There is of course always a possibility that this is Firmware related, but check the parts etc. first.
@joelvanbeek try the service code on your camera to see if there is an error code. Make sure that after your work on your camera, that both Flex cables are properly re-connected and that the mainboard is free of any corrosion etc. Also make sure that you check the connectors for the flex cables. Remove the cables and then restart them. Check the ends for any tears etc. Here is the SM [document|31925] that will help you with the diagnostic as well as the service for your camera. Let us know what you find.
Tehre is of course always a possibility that this is Firmware related, but check the parts etc. first.