@thomas35549 just going by the number on this board as well as the partial picture, it appears as if you are talking about a daughter card which would have taken over the original CPU. The one you have appears to be a XLR8 ZIF Processor Upgrade. In that case, the jumpers would adjust the backside bus speed and ratio. According to the manual here are the settings that
+
@thomas35549 just going by the number on this board as well as the partial picture, it appears as if you are talking about a daughter card which would have taken over the original CPU. The one you have appears to be a XLR8 ZIF Processor Upgrade. In that case, the jumpers would adjust the backside bus speed and ratio. According to the manual here are the settings
[image|3098892]
This would be the manual [document|31867] you need, to figure out what to do with your card
@thomas35549 just going by the number on this board as well as the partial picture, it appears as if you are stalking about a daughter card which would have taken over the original CPU. The one you have appears to be a XLR8 ZIF Processor Upgrade. In that case, the jumpers would adjust the backside bus speed and ratio. According to the manual here are the settings that
+
@thomas35549 just going by the number on this board as well as the partial picture, it appears as if you are talking about a daughter card which would have taken over the original CPU. The one you have appears to be a XLR8 ZIF Processor Upgrade. In that case, the jumpers would adjust the backside bus speed and ratio. According to the manual here are the settings that
[image|3098892]
This would be the manual [document|31867] you need, to figure out what to do with your card
@thomas35549 just going by the number on this board as well as the partial picture, it appears as if you are stalking about a daughter card which would have taken over the original CPU. The one you have appears to be a XLR8 ZIF Processor Upgrade. In that case, the jumpers would adjust the backside bus speed and ratio. According to the manual here are the settings that
[image|3098892]
This would be the manual [document|31867] you need, to figure out what to do with your card