Recently I attempted a se 2 housing replacement. I tried it first with my mams old phone and once the repair was done It kept kernal panicking every 3 minutes. I couldn't figure out the issue. Luckily my friend has the same phone and needed all the same replacements so me assuming there was an issue with my mams logic board I used the same housing with the same essential parts (volume flex and wireless charger) and transferred his charging flex, camera, logic board etc into the housing. Keep in mind all volume controls work and charging is functional. However, it's still kernel panicking. My thinking is A) The wireless charger is the issue as I wasn't too careful removing it and some copper was exposed, I removed it and kernel panicking was still happening so I don't know if that rules out the issue or if there's a temperature monitor in it for the battery? B) The volume Flex or C) The charging flex although I was very careful removing this using 99% IPA.
-
What is the most likely issue and how can I resolve it? Thanks
+
+
Recently I posted about a housing replacement causing mic1 kernel panics in my iPhone SE 2020.
+
+
This first started when I purchased a new housing,battery and screen for my mams old SE 2020, however once I completed the repair process it was kernel panicking every 3 minutes.
+
+
I assumed it was an issue with that phone and left it for a few weeks.
+
+
Coincidentally my friend also has the same phone and was in need of the same parts so I said I'd fix it for him. I was very careful removing everything, using IPA to weaken adhesives etc however the same issue persisted.
+
+
I assumed maybe I broke the charging port when removing it, although unlikely in both phones and the same goes for the logic board however I was very careful with them too.
+
+
+
+
And what makes it even weirder is when I moved the parts from the original SE into my friends old housing it works perfectly??
+
+
+
+
So is it the housing causing the Kernel panics? is it the wireless charger possibly? I scuffed that up quite a bit when putting it in the new housing and then removed it once I suspected that but same issue occurs (Not sure if lack of qi charger causes kernel panics).
Hey everyone,
Recently I attempted a se 2 housing replacement. I tried it first with my mams old phone and once the repair was done It kept kernal panicking every 3 minutes. I couldn't figure out the issue. Luckily my friend has the same phone and needed all the same replacements so me assuming there was an issue with my mams logic board I used the same housing with the same essential parts (volume flex and wireless charger) and transferred his charging flex, camera, logic board etc into the housing. Keep in mind all volume controls work and charging is functional. However, it's still kernel panicking. My thinking is A) The wireless charger is the issue as I wasn't too careful removing it and some copper was exposed, I removed it and kernel panicking was still happening so I don't know if that rules out the issue or if there's a temperature monitor in it for the battery? B) The volume Flex or C) The charging flex although I was very careful removing this using 99% IPA.
What is the most likely issue and how can I resolve it? Thanks