Some of those may show continuity, depending on which you're looking at. You're checking on the Logic board side, correct? Rather than the I/O board side. Here's the pinouts for the logic board side. Pics for reference. [br]
-
[br]
+
[image|3079768]
-
[br]
[br]
From top to bottom:
# Ground
# Ground
# 1.5V (I assume since that line is called PP1V5_S0)
# 5V (This is PP5V_S4)
# 3.3V (PP3V3_S3)
# 3.3V (PP3V3_WLAN)
-
You should definitely get continuity between the top 2. And possibly also for the bottom 2. But I'm not 100% sure on that because they connect via an IC so could go either way.
Some of those may show continuity, depending on which you're looking at. You're checking on the Logic board side, correct? Rather than the I/O board side. Here's the pinouts for the logic board side. Pics for reference. [br]
[br]
[image|3079768]
[br]
[br]
From top to bottom:
# Ground
# Ground
# 1.5V (I assume since that line is called PP1V5_S0)
# 5V (This is PP5V_S4)
# 3.3V (PP3V3_S3)
# 3.3V (PP3V3_WLAN)
You should definitely get continuity between the top 2. And possibly also for the bottom 2. But I'm not 100% sure on that because they connect via an IC so could go either way.