@victormdgz take a really close look at R1. It looks like the marking on that resistor is 102 which makes it a 1K resistor. Measure the distance from point to point to get the length of the component to determine the package size. Obviously this board has had world done on it before. C2 just has a solder bridge to what appears to ground, which may still allow your board to work. U5 has a not so great looking jumper to the trace, so possible solder pad torn off during a repair.
The immediate area of concern that I have is for your SRAM as well as U5. If you really want to resurrect this, you may need to start looking for a donor board where you can
a. measure the components and
b. measure the traces for the routing.
Schematics are not easily found.
[image|3009816]