I just replaced my battery and the new battery hits/crushes the display, causing some discoloring along the cracked part of the display.
[image|3002212]
[image|3002214]
The 1st image shows the display is properly attached to the chassis of the phone, while the 2nd image shows the display is removed/unscrewed (P2/Pentalobe Screw) from the chassis.
-
There's also some discoloration/white streak around the browser's forward button in the first photo.
+
There's also some discoloration/white streak around the browser's forward button in the 1st photo, but not present if the display is unscrewed from the chassis, shown in the 2nd photo.
Is it because the glass is shattered so I have a clearance issue or is it the battery?
PS: The battery is slightly taller than the Taptic Engine and speaker, and almost as tall as the logic board.
I just replaced my battery and the new battery hits/crushes the display, causing some discoloring along the cracked part of the display.
[image|3002212]
[image|3002214]
The 1st image shows the display is properly attached to the chassis of the phone, while the 2nd image shows the display is removed/unscrewed (P2/Pentalobe Screw) from the chassis.
There's also some discoloration/white streak around the browser's forward button in the first photo.
Is it because the glass is shattered so I have a clearance issue or is it the battery?
-
PS: The battery is slightly taller than the Taptic Engine and speaker, but almost as tall as the logic board.
+
PS: The battery is slightly taller than the Taptic Engine and speaker, and almost as tall as the logic board.
[image|3002234]
[image|3002230]
I just replaced my battery and the new battery hits/crushes the display, causing some discoloring along the cracked part of the display.
[image|3002212]
[image|3002214]
The 1st image shows the display is properly attached to the chassis of the phone, while the 2nd image shows the display is removed/unscrewed (P2/Pentalobe Screw) from the chassis.
There's also some discoloration/white streak around the browser's forward button in the first photo.
Is it because the glass is shattered so I have a clearance issue or is it the battery?
PS: The battery is slightly taller than the Taptic Engine and speaker, but almost as tall as the logic board.