Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60. ''Note:'' You're correct it is a mechanical disc drive and not a solid state i.e. SSD
-
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as the in the original it should be OK.
+
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as in the original it should be OK.
Having 2 black wires is unusual though. Are you sure that one isn't a brown? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan maker which colour wire is used for which sensor e.g. white, yellow, blue, brown
Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60. ''Note:'' You're correct it is a mechanical disc drive and not a solid state i.e. SSD
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as the in the original it should be OK.
-
Having 2 black wires is unusual though. Are you sure that one isn't a brown? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor.
+
Having 2 black wires is unusual though. Are you sure that one isn't a brown? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan maker which colour wire is used for which sensor e.g. white, yellow, blue, brown
Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60. ''Note:'' You're correct it is a mechanical disc drive and not a solid state i.e. SSD
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as the in the original it should be OK.
-
Having 2 black wires is unusual though. Are you sure that one isn't a brown or a dark blue? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor.
+
Having 2 black wires is unusual though. Are you sure that one isn't a brown? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor.
Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
-
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60
+
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60. ''Note:'' You're correct it is a mechanical disc drive and not a solid state i.e. SSD
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as the in the original it should be OK.
Having 2 black wires is unusual though. Are you sure that one isn't a brown or a dark blue? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor.
Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60
-
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order as the in the original it will work. Having 2 black wires is unusual though.
+
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order and as long as the HP part number is the same as the in the original it should be OK.
-
Are you sure that one isn't a brown or a dark blue? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor. As long as the HP part number is the same it should be OK
+
Having 2 black wires is unusual though. Are you sure that one isn't a brown or a dark blue? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor.
Here's the [http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
+
Here's the [link|http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [link|https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
-
Here's a link to the [https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
+
Here's a link to the [link|https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60
-
As for the fan as can be seen in this [https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order as the in the original it will work. Having 2 black wires is unusual though. Are you sure that one isn't a brown or a dark blue?
+
As for the fan as can be seen in this [link|https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order as the in the original it will work. Having 2 black wires is unusual though.
+
+
Are you sure that one isn't a brown or a dark blue? The red and black are the power wires i.e. volts (r) and earth (b) and the other two wires are a temperature and speed sensor but it can vary depending on the fan which colour wire is used for which sensor. As long as the HP part number is the same it should be OK
Hi @toothlessp99233
Here's the [http://h10032.www1.hp.com/ctg/Manual/c06189775.pdf|maintenance and service guide], taken from this support [https://support.hp.com/ca-en/product/hp-15-ay000-notebook-pc-series/10862300/model/11926588/manuals|webpage] for the laptop.
Here's a link to the [https://partsurfer.hp.com/partsurfer?searchtext=15-ay065nr|parts list] for your particular model.
The parts list shows that there are 2 product variants for your particular model i.e. W7V75UA and W7V75UAR. The ''product number'' for your particular model is shown on the info label on the bottom of the laptop.
In any case both variants have the same HDD i.e. Part # ''778192-005'' 1.0TB SATA hard disk drive - 5,400 RPM, 2.5-inch form factor, 9.5mm height (raw drive) which can be seen in the parts list of the manual on p.35 Item #16 as well as the top of p.60
As for the fan as can be seen in this [https://www.broadwaycomputers.net.au/view/productdetails.php?product=FHP15-AC|link] (zoom in on image) it is a 5VDC 0.4A fan . Usually fans etc only plug in one way so as long as the wire colours on the plug of the new fan are in the same order as the in the original it will work. Having 2 black wires is unusual though. Are you sure that one isn't a brown or a dark blue?