*** I've now chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts and everything feels much more professional.[br]
+
[br]
+
[br]
+
[br]
+
[br]
+
Battery Programming:[br]
You need to boot the phone with a non genuine battery before install the new programmed one.
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
Here is how to get software and update Icopy[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
[br]
[br]
The missing step that Often fixes it after prorgamming the new battery, is to boot the phone once with an unprogrammed battery or a power supply. Once it boots to home screen you can put the new battery in.[br]
Pro Tip. Boot the phone once with the New Battery before you program it!![br]
[br]
[image|2898509]
[br]
[image|2898508]
[br]
[br]
[br]
[image|2898554]
[br]
[br]
-
IF you are spot weldin batteries, then Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. No programmer required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts. And getting a quality spot weld is very difficult.[br]
+
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. No programmer required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts. And getting a quality spot weld is very difficult.[br]
-
*** Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts and everything feels much more professional.
You need to boot the phone with a non genuine battery before install the new programmed one.
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
Here is how to get software and update Icopy[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
[br]
[br]
The missing step that Often fixes it after prorgamming the new battery, is to boot the phone once with an unprogrammed battery or a power supply. Once it boots to home screen you can put the new battery in.[br]
Pro Tip. Boot the phone once with the New Battery before you program it!![br]
IF you are spot weldin batteries, then Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. No programmer required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts. And getting a quality spot weld is very difficult.[br]
-
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. Spot welding is still required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts
-
Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts.
+
*** Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts and everything feels much more professional.
You need to boot the phone with a non genuine battery before install the new programmed one.
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
Here is how to get software and update Icopy[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
[br]
[br]
The missing step that Often fixes it after prorgamming the new battery, is to boot the phone once with an unprogrammed battery or a power supply. Once it boots to home screen you can put the new battery in.[br]
Pro Tip. Boot the phone once with the New Battery before you program it!![br]
Ive still had a few times that the battery percentage did not reset... after all of these steps
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. Spot welding is still required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts
Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts.
You need to boot the phone with a non genuine battery before install the new programmed one.
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
Here is how to get software and update Icopy[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
[br]
[br]
The missing step that Often fixes it after prorgamming the new battery, is to boot the phone once with an unprogrammed battery or a power supply. Once it boots to home screen you can put the new battery in.[br]
Pro Tip. Boot the phone once with the New Battery before you program it!![br]
Ive still had a few times that the battery percentage did not reset... after all of these steps
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. Spot welding is still required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts
Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts.
You need to boot the phone with a non genuine battery before install the new programmed one.
-
-
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
Here is how to get software and update Icopy[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
+
[br]
+
[br]
+
The missing step that Often fixes it after prorgamming the new battery, is to boot the phone once with an unprogrammed battery or a power supply. Once it boots to home screen you can put the new battery in.[br]
+
Pro Tip. Boot the phone once with the New Battery before you program it!![br]
Ive still had a few times that the battery percentage did not reset... after all of these steps
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. Spot welding is still required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts
Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts.
Wow thanks guys i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
-
[br]
-
So so like you guys are saying this might not be possible with Iphone 12 and up without a spot welder? ANyone have links to more info on this?[br]
-
Or perhaps the battery adaptor boards that came with my Icopy will help as "***++[link|https://www.ifixit.com/User/4106591/Jerry+W|Jerry W]"++*** mentioned[br]
+
You need to boot the phone with a non genuine battery before install the new programmed one.
+
+
+
+
With the quanli icopy programmer i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
Ive still had a few times that the battery percentage did not reset... after all of these steps
+
+
Mobile sentrix now sells battery tag on flex that you leave inside the phone that resets the percentage. Spot welding is still required. I'm not really drawn to this method as there is nothing to keep this from unplugging upon any impacts
+
+
Now I've chosen to recommend my customers to replace the entire battery and just deal with the non genuine battery warning. That way we are not reusing used battery parts.
Wow thanks guys i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
So so like you guys are saying this might not be possible with Iphone 12 and up without a spot welder? ANyone have links to more info on this?[br]
Or perhaps the battery adaptor boards that came with my Icopy will help as "***++[link|https://www.ifixit.com/User/4106591/Jerry+W|Jerry W]"++*** mentioned[br]
Wow thanks guys i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
So so like you guys are saying this might not be possible with Iphone 12 and up without a spot welder? ANyone have links to more info on this?[br]
-
Or perhaps the battery adaptor boards that came with my Icopy will help as "***++[link|https://www.ifixit.com/User/4106591/Jerry+W|Jerry W|new_window=true]"++*** mentioned[br]
+
Or perhaps the battery adaptor boards that came with my Icopy will help as "***++[link|https://www.ifixit.com/User/4106591/Jerry+W|Jerry W]"++*** mentioned[br]
Wow thanks guys i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
So so like you guys are saying this might not be possible with Iphone 12 and up without a spot welder? ANyone have links to more info on this?[br]
+
Or perhaps the battery adaptor boards that came with my Icopy will help as "***++[link|https://www.ifixit.com/User/4106591/Jerry+W|Jerry W|new_window=true]"++*** mentioned[br]
Wow thanks guys i was able to reset the battery back to 0 Cycles and 100%. At first i tried to reset the percentage without resetting the cycle count and it didnt work. but as soon as i did both it worked.[br]
[br]
So so like you guys are saying this might not be possible with Iphone 12 and up without a spot welder? ANyone have links to more info on this?[br]
[br]
Here is how to get software[br]
https://www.youtube.com/watch?v=deK6cBkwAVQ[br]
[br]
[image|2898509]
[br]
[image|2898508]