FWIW the service manual is located [http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00218664/c00218664.pdf|HERE]
-
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the white and black wires shown in [guide|3891|THIS GUIDE|page=2] steps 3,4,5. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
+
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. Each wire should have their own connector on it ''similar'' to the white and black wires shown in [guide|3891|THIS GUIDE|page=2] steps 3,4,5. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
FWIW the service manual is located [http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00218664/c00218664.pdf|HERE]
-
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the grey and black wires shown in [http://www.ifixit.com/Guide/Installing-HP-Pavilion-dv5000-PCI-Module/3891/2|THIS GUIDE] steps 3,4,5. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
+
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the white and black wires shown in [guide|3891|THIS GUIDE|page=2] steps 3,4,5. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
FWIW the service manual is located [http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00218664/c00218664.pdf|HERE]
-
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the grey and black wires shown in [guide|996|THIS GUIDE|stepid=5256] step7-8. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
+
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the grey and black wires shown in [http://www.ifixit.com/Guide/Installing-HP-Pavilion-dv5000-PCI-Module/3891/2|THIS GUIDE] steps 3,4,5. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
FWIW the service manual is located [http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00218664/c00218664.pdf|HERE]
I presume The 2 wire cable you speak of are the antenna wires - I cant locate specific detail on where each one goes. each wire should have their own connector on it ''similar'' to the grey and black wires shown in [guide|996|THIS GUIDE|stepid=5256] step7-8. Locate the connectors on the main board and see if each wire reaches both or only 1 connector - My guess is one wire will be longer than the other and they will only fit neatly one way round.
HIH