Powers up to logo with spinning wheel and then goes black
crwdns2934249:0crwdne2934249:0:
When booting up I get the grey screen with the apple logo and a spinning wheel. After a few seconds the display goes black. I reset the pram, changed out the battery and pressed the button next to it on the mainboard once. Turned the power off, removed the battery, held the power button for 10 to 15 seconds. Left the battery out for 10 minues, put the battery back in and still get the same thing. I swapped out the hard drive and still get the same thing. I can start it up in target drive and the displays stays on. I ran the utility and checked the hard drive and it stated the hard drive was ok. Also changed out the power supply and still get the same thing. Also used a different display. Still the same.
Powers up to logo with spinning wheel and then goes black
crwdns2934249:0crwdne2934249:0:
When booting up I get the grey screen with the apple logo and a spinning wheel. After a few seconds the display goes black. I reset the pram, changed out the battery and pressed the button next to it on the mainboard once. Turned the power off, removed the battery, held the power button for 10 to 15 seconds. Left the battery out for 10 minues, put the battery back in and still get the same thing. I swapped out the hard drive and still get the same thing. I can start it up in target drive and the displays stays on. I ran the utility and checked the hard drive and it stated the hard drive was ok. Also changed out the power supply and still get the same thing. Also used a different display. Still the same.
Powers up to logo with spinning wheel and then goes black
crwdns2934249:0crwdne2934249:0:
When booting up I get the grey screen with the apple logo and a spinning wheel. After a few seconds the display goes black. I reset the pram, changed out the battery and pressed the button next to it on the mainboard once. Turned the power off, removed the battery, held the power button for 10 to 15 seconds. Left the battery out for 10 minues, put the battery back in and still get the same thing. I swapped out the hard drive and still get the same thing. I can start it up in target drive and the displays stays on. I ran the utility and checked the hard drive and it stated the hard drive was ok. Also changed out the power supply and still get the same thing. Also used a different display. Still the same.