Here's a link that shows the [link|https://www.onetransistor.eu/2020/08/xtw100-minprogrammer-schematic-driver.html|schematic] for the programmer.
-
The oscillator schematic component ref ID is Y2 and it has a frequency of 8MHz as can also be seen on the component in the image you posted. There is no other information as to its other specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [link|https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
+
The crystal oscillator schematic component ref ID is Y2 and it has a frequency of 8MHz as can also be seen on the component in the image you posted. There is no other information as to its other specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [link|https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
It may save a lot of time and hassles if you just purchased a new [link|https://www.aliexpress.com/item/32690240745.html|programmer]. (supplier example only) as they are not that expensive.
Here's a link that shows the [link|https://www.onetransistor.eu/2020/08/xtw100-minprogrammer-schematic-driver.html|schematic] for the programmer.
-
The oscillator schematic ref ID is Y2 and it has a frequency of 8MHz as can also be seen in the image you posted. There is no other information as to the specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [link|https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
+
The oscillator schematic component ref ID is Y2 and it has a frequency of 8MHz as can also be seen on the component in the image you posted. There is no other information as to its other specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [link|https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
It may save a lot of time and hassles if you just purchased a new [link|https://www.aliexpress.com/item/32690240745.html|programmer]. (supplier example only) as they are not that expensive.
Here's a link that show the [https://www.onetransistor.eu/2020/08/xtw100-minprogrammer-schematic-driver.html|schematic] for the programmer.
+
Here's a link that shows the [link|https://www.onetransistor.eu/2020/08/xtw100-minprogrammer-schematic-driver.html|schematic] for the programmer.
-
The oscillator schematic ref ID is Y2 and it has a frequency of 8MHz as can also be seen in the image you posted. There is no other information as to the specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
+
The oscillator schematic ref ID is Y2 and it has a frequency of 8MHz as can also be seen in the image you posted. There is no other information as to the specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [link|https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
-
It may save a lot of time and hassles if you just purchased a new [https://www.aliexpress.com/item/32690240745.html|programmer]. (supplier example only) as they are not that expensive.
+
It may save a lot of time and hassles if you just purchased a new [link|https://www.aliexpress.com/item/32690240745.html|programmer]. (supplier example only) as they are not that expensive.
Hi,
Here's a link that show the [https://www.onetransistor.eu/2020/08/xtw100-minprogrammer-schematic-driver.html|schematic] for the programmer.
The oscillator schematic ref ID is Y2 and it has a frequency of 8MHz as can also be seen in the image you posted. There is no other information as to the specifications i.e. load capacitance, drive level, ESR etc so it will be difficult to know what the exact [https://www.mouser.com/c/passive-components/frequency-control-timing-devices/crystals/?frequency=8%20MHz&gclid=EAIaIQobChMIkoTfluqW_AIVopJmAh2jfAnhEAAYAiAAEgJ_i_D_BwE|replacement] would be. (examples only).
It may save a lot of time and hassles if you just purchased a new [https://www.aliexpress.com/item/32690240745.html|programmer]. (supplier example only) as they are not that expensive.