@terranoman thios osunds like a power board issue. If you fo;llow the troubleshooting flowchart for your printer
+
@terranoman this sounds like a power board issue. If you follow the troubleshooting flowchart for your printer
[image|2734355]
-
it wil get you to these results
+
it will get you to these results
[Presumable Cause]
• PS Unit damage
• Main Board damage
• Panel Board damage
[Major Troubleshooting]
• PS Unit replacement
• Main Board replacement
• Panel Board replacement
-
Not much help but a beginning
+
Not much help but a beginning. Here comes the fun part.
Here is the [document|27643] for your printer. Use that to get to your power board and inspect that for any blown fuses, burnt components etc. You can always post some pictures of what you find with your QUESTION so we can continue to assist you as needed. [guide|21499]
Make sure that you have the power cord properly plugged in and double check all that before taking your printer apart.
@terranoman thios osunds like a power board issue. If you fo;llow the troubleshooting flowchart for your printer
[image|2734355]
it wil get you to these results
[Presumable Cause]
• PS Unit damage
• Main Board damage
• Panel Board damage
[Major Troubleshooting]
• PS Unit replacement
• Main Board replacement
• Panel Board replacement
Not much help but a beginning
Here is the [document|27643] for your printer. Use that to get to your power board and inspect that for any blown fuses, burnt components etc. You can always post some pictures of what you find with your QUESTION so we can continue to assist you as needed. [guide|21499]
-
Make sure that you have the power cord properly plugged in and double check all that before taken your printer apart.
+
Make sure that you have the power cord properly plugged in and double check all that before taking your printer apart.
@terranoman thios osunds like a power board issue. If you fo;llow the troubleshooting flowchart for your printer
[image|2734355]
it wil get you to these results
[Presumable Cause]
• PS Unit damage
• Main Board damage
• Panel Board damage
[Major Troubleshooting]
• PS Unit replacement
• Main Board replacement
• Panel Board replacement
Not much help but a beginning
Here is the [document|27643] for your printer. Use that to get to your power board and inspect that for any blown fuses, burnt components etc. You can always post some pictures of what you find with your QUESTION so we can continue to assist you as needed. [guide|21499]
Make sure that you have the power cord properly plugged in and double check all that before taken your printer apart.