Here's the ifixit [guide|37044] guide that will help.
Regarding the battery I'm not quite sure about the type of battery but I found this [link|https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
The information on the battery will help you to find a replacement. It showed that it is a 553450-2P 3.7V 2000mAH LiPo battery.-***''Important make sure that you check the battery in your model to see what information is on it before ordering.''***
The 553450 is the dimensions of the battery in mm. The convention with these batteries is that first 2 digits are the depth with a decimal between the digits that is not shown, the next 2 digits are the width and the last 2 are the length. This translates to be a 5.5mm D x 34mm W x 50mm L battery.
-
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is is type Lithium Polymer.
+
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is the battery type Lithium Polymer.
''If you have the same model battery as described above'', unfortunately I can't find a supplier only the [link|https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer].
An alternative is to look for a smaller dimensioned battery having the same or very similar voltage/capacity specs. It need to be smaller to physically fit into the space in the speaker for the battery.
It also needs to have a 3 wire connection one each for +ve batt (red) and gnd (black) and a third for battery monitoring purposes (usually white).
The nearest that I could find was [link|https://www.aliexpress.com/item/1005003763082350.html?spm=a2g0o.productlist.0.0.6e4f6244vurtP8&algo_pvid=049f493d-c41e-4c31-a922-dbf739c859eb&algo_exp_id=049f493d-c41e-4c31-a922-dbf739c859eb-9&pdp_ext_f=%7B%22sku_id%22%3A%2212000027082114515%22%7D&pdp_npi=2%40dis%21AUD%216.33%215.38%21%21%219.07%21%21%402103143616625631974563211edfad%2112000027082114515%21sea&curPageLogUid=nWQDn6EwSzde|this] one. The only problem is that it has half the capacity of the original so the speaker will only work on battery power for half the time that it used to
''If the specifications on your battery are different,'' search online using the specifications e.g. ''(insert 6 digit dimension number) (insert Voltage) (insert capacity) (insert type) battery'' to hopefully find one. For the above battery I looked for 553450-2P 3.7V 2000mAH LiPo battery.
Hopefully this is of some help to get your speaker working on battery power only.
Here's the ifixit [guide|37044] guide that will help.
Regarding the battery I'm not quite sure about the type of battery but I found this [link|https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
The information on the battery will help you to find a replacement. It showed that it is a 553450-2P 3.7V 2000mAH LiPo battery.-***''Important make sure that you check the battery in your model to see what information is on it before ordering.''***
The 553450 is the dimensions of the battery in mm. The convention with these batteries is that first 2 digits are the depth with a decimal between the digits that is not shown, the next 2 digits are the width and the last 2 are the length. This translates to be a 5.5mm D x 34mm W x 50mm L battery.
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is is type Lithium Polymer.
''If you have the same model battery as described above'', unfortunately I can't find a supplier only the [link|https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer].
An alternative is to look for a smaller dimensioned battery having the same or very similar voltage/capacity specs. It need to be smaller to physically fit into the space in the speaker for the battery.
It also needs to have a 3 wire connection one each for +ve batt (red) and gnd (black) and a third for battery monitoring purposes (usually white).
-
The nearest that I could find was [https://www.aliexpress.com/item/1005003763082350.html?spm=a2g0o.productlist.0.0.6e4f6244vurtP8&algo_pvid=049f493d-c41e-4c31-a922-dbf739c859eb&algo_exp_id=049f493d-c41e-4c31-a922-dbf739c859eb-9&pdp_ext_f=%7B%22sku_id%22%3A%2212000027082114515%22%7D&pdp_npi=2%40dis%21AUD%216.33%215.38%21%21%219.07%21%21%402103143616625631974563211edfad%2112000027082114515%21sea&curPageLogUid=nWQDn6EwSzde|this] one. The only problem is that it has half the capacity of the original so the player will only last on battery power for half the time that it used to
+
The nearest that I could find was [link|https://www.aliexpress.com/item/1005003763082350.html?spm=a2g0o.productlist.0.0.6e4f6244vurtP8&algo_pvid=049f493d-c41e-4c31-a922-dbf739c859eb&algo_exp_id=049f493d-c41e-4c31-a922-dbf739c859eb-9&pdp_ext_f=%7B%22sku_id%22%3A%2212000027082114515%22%7D&pdp_npi=2%40dis%21AUD%216.33%215.38%21%21%219.07%21%21%402103143616625631974563211edfad%2112000027082114515%21sea&curPageLogUid=nWQDn6EwSzde|this] one. The only problem is that it has half the capacity of the original so the speaker will only work on battery power for half the time that it used to
''If the specifications on your battery are different,'' search online using the specifications e.g. ''(insert 6 digit dimension number) (insert Voltage) (insert capacity) (insert type) battery'' to hopefully find one. For the above battery I looked for 553450-2P 3.7V 2000mAH LiPo battery.
Hopefully this is of some help to get your speaker working on battery power only.
Here's the ifixit [guide|37044] guide that will help.
Regarding the battery I'm not quite sure about the type of battery but I found this [link|https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
The information on the battery will help you to find a replacement. It showed that it is a 553450-2P 3.7V 2000mAH LiPo battery.-***''Important make sure that you check the battery in your model to see what information is on it before ordering.''***
The 553450 is the dimensions of the battery in mm. The convention with these batteries is that first 2 digits are the depth with a decimal between the digits that is not shown, the next 2 digits are the width and the last 2 are the length. This translates to be a 5.5mm D x 34mm W x 50mm L battery.
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is is type Lithium Polymer.
-
''If you have the same model battery as described above'', unfortunately I can't find a supplier only the [link|https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer]
+
''If you have the same model battery as described above'', unfortunately I can't find a supplier only the [link|https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer].
+
+
An alternative is to look for a smaller dimensioned battery having the same or very similar voltage/capacity specs. It need to be smaller to physically fit into the space in the speaker for the battery.
+
+
It also needs to have a 3 wire connection one each for +ve batt (red) and gnd (black) and a third for battery monitoring purposes (usually white).
+
+
The nearest that I could find was [https://www.aliexpress.com/item/1005003763082350.html?spm=a2g0o.productlist.0.0.6e4f6244vurtP8&algo_pvid=049f493d-c41e-4c31-a922-dbf739c859eb&algo_exp_id=049f493d-c41e-4c31-a922-dbf739c859eb-9&pdp_ext_f=%7B%22sku_id%22%3A%2212000027082114515%22%7D&pdp_npi=2%40dis%21AUD%216.33%215.38%21%21%219.07%21%21%402103143616625631974563211edfad%2112000027082114515%21sea&curPageLogUid=nWQDn6EwSzde|this] one. The only problem is that it has half the capacity of the original so the player will only last on battery power for half the time that it used to
''If the specifications on your battery are different,'' search online using the specifications e.g. ''(insert 6 digit dimension number) (insert Voltage) (insert capacity) (insert type) battery'' to hopefully find one. For the above battery I looked for 553450-2P 3.7V 2000mAH LiPo battery.
+
+
Hopefully this is of some help to get your speaker working on battery power only.
Here's the ifixit [guide|37044] guide that will help.
-
Regarding the battery I'm not quite sure about the type of battery but I found this [https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
+
Regarding the battery I'm not quite sure about the type of battery but I found this [link|https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
The information on the battery will help you to find a replacement. It showed that it is a 553450-2P 3.7V 2000mAH LiPo battery.-***''Important make sure that you check the battery in your model to see what information is on it before ordering.''***
The 553450 is the dimensions of the battery in mm. The convention with these batteries is that first 2 digits are the depth with a decimal between the digits that is not shown, the next 2 digits are the width and the last 2 are the length. This translates to be a 5.5mm D x 34mm W x 50mm L battery.
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is is type Lithium Polymer.
-
''If you have the same battery model battery as described above'', unfortunately I can't find a supplier only the [https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer]
+
''If you have the same model battery as described above'', unfortunately I can't find a supplier only the [link|https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer]
''If the specifications on your battery are different,'' search online using the specifications e.g. ''(insert 6 digit dimension number) (insert Voltage) (insert capacity) (insert type) battery'' to hopefully find one. For the above battery I looked for 553450-2P 3.7V 2000mAH LiPo battery.
Hi @atxaro
Definitely sounds like a battery problem.
Here's the ifixit [guide|37044] guide that will help.
Regarding the battery I'm not quite sure about the type of battery but I found this [https://www.reddit.com/r/batteries/comments/ko9ghp/can_anyone_help_identify_this_battery_came_out_of/|link] which said that the battery came out of a Skullcandy Air Raid speaker.
The information on the battery will help you to find a replacement. It showed that it is a 553450-2P 3.7V 2000mAH LiPo battery.-***''Important make sure that you check the battery in your model to see what information is on it before ordering.''***
The 553450 is the dimensions of the battery in mm. The convention with these batteries is that first 2 digits are the depth with a decimal between the digits that is not shown, the next 2 digits are the width and the last 2 are the length. This translates to be a 5.5mm D x 34mm W x 50mm L battery.
The 3.7V is the voltage, the 2000mAH is the capacity and the LiPo is is type Lithium Polymer.
''If you have the same battery model battery as described above'', unfortunately I can't find a supplier only the [https://www.fly-power.com/en/battery-packs-2/battery-chemistry-categoreis/li-po-battery/item/3-7v-2000mah-lithium-ion-polymer-battery-pack-1s2p-of-flp-553450|manufacturer]
''If the specifications on your battery are different,'' search online using the specifications e.g. ''(insert 6 digit dimension number) (insert Voltage) (insert capacity) (insert type) battery'' to hopefully find one. For the above battery I looked for 553450-2P 3.7V 2000mAH LiPo battery.