Since you haven't changed anything, it isn't due to defective new parts and as you said there wasn't any difference when the green things were removed.
=== Most Likely Cause of Problem ===
-
-
So my guess is that something got broken inside the stick module (not the green things), my guess would be that you may have pushed the stick too far in some direction and since the frame isn't mounted, the limit where you can't move them any more isn't stopped by. So when you move the stick too far, it stops on something more brittle and it broke.
+
So my guess is that something got broken inside the stick module (not the green things), my guess would be that you may have pushed the stick too far in some direction and since the frame wasn't mounted during the cleaning, the limit where you can't move them any more isn't stopped by. So when you move the stick too far, it stops on something more brittle and it broke.
This means that you will have to change the whole stick assembly to repair it, this will require soldering. The guide linked below will show you step by step how to change the sticks.
Since you haven't changed anything, it isn't due to defective new parts and as you said there wasn't any difference when the green things were removed.
=== Most Likely Cause of Problem ===
So my guess is that something got broken inside the stick module (not the green things), my guess would be that you may have pushed the stick too far in some direction and since the frame isn't mounted, the limit where you can't move them any more isn't stopped by. So when you move the stick too far, it stops on something more brittle and it broke.
This means that you will have to change the whole stick assembly to repair it, this will require soldering. The guide linked below will show you step by step how to change the sticks.
***Good luck with the repair! :D***
[guide|27764][br]
[guide|27763]