I can't find a service manual for your model but here's the start of the [link|https://www.manualslib.com/manual/1228428/Samsung-Rf28hmedbsr.html?page=97#manual|ice maker troubleshooting flowcharts] that may help.
-
I couldn't find the service manual for your particular model but it is a RF28H series so hopefully it may be close enough to be of some help.
+
It is for a RF28H series so hopefully it may be close enough to be of some help.
If you can't hear the [link|https://www.partselect.com/PS8737459-Samsung-DA62-04027A-Water-Inlet-Valve.htm?SourceCode=21&SearchTerm=RF28HFEDBSR&ModelNum=RF28HFEDBSR|ice water inlet valve] when the ice maker test switch is operated, check the wiring connection to the valve (location is shown in the link - this IS for your model). It looks like there are 3 valves, so it will be a main supply, dispenser supply and ice maker supply. To get water to flow the main has to be operated as well as the desired individual valve i.e. for dispenser it is main and dispenser valves, for ice maker it is main and ice valves. As the dispenser is working obviously the main is as well. So you need to work out which one is the ice water valve
If it seems OK then on p.50 it shows how to remove the ice maker so that you can check if there is water in the tray or not.
Also on p.60 it shows how to get into the diagnostic tests mode which may help.
Sorry I can't help further and especially if the manual isn't relevant to your model
I can't find a service manual for your model but here's the start of the [link|https://www.manualslib.com/manual/1228428/Samsung-Rf28hmedbsr.html?page=97#manual|ice maker troubleshooting flowcharts] that may help.
I couldn't find the service manual for your particular model but it is a RF28H series so hopefully it may be close enough to be of some help.
If you can't hear the [link|https://www.partselect.com/PS8737459-Samsung-DA62-04027A-Water-Inlet-Valve.htm?SourceCode=21&SearchTerm=RF28HFEDBSR&ModelNum=RF28HFEDBSR|ice water inlet valve] when the ice maker test switch is operated, check the wiring connection to the valve (location is shown in the link - this IS for your model). It looks like there are 3 valves, so it will be a main supply, dispenser supply and ice maker supply. To get water to flow the main has to be operated as well as the desired individual valve i.e. for dispenser it is main and dispenser valves, for ice maker it is main and ice valves. As the dispenser is working obviously the main is as well. So you need to work out which one is the ice water valve
-
If it seems OK then on p.50 it shows to to remove the ice maker so that you can check if there is water in the tray or not.
+
If it seems OK then on p.50 it shows how to remove the ice maker so that you can check if there is water in the tray or not.
Also on p.60 it shows how to get into the diagnostic tests mode which may help.
Sorry I can't help further and especially if the manual isn't relevant to your model
I can't find a service manual for your model but here's the start of the [https://www.manualslib.com/manual/1228428/Samsung-Rf28hmedbsr.html?page=97#manual|ice maker troubleshooting flowcharts] that may help.
+
I can't find a service manual for your model but here's the start of the [link|https://www.manualslib.com/manual/1228428/Samsung-Rf28hmedbsr.html?page=97#manual|ice maker troubleshooting flowcharts] that may help.
I couldn't find the service manual for your particular model but it is a RF28H series so hopefully it may be close enough to be of some help.
-
If you can't hear the [https://www.partselect.com/PS8737459-Samsung-DA62-04027A-Water-Inlet-Valve.htm?SourceCode=21&SearchTerm=RF28HFEDBSR&ModelNum=RF28HFEDBSR|ice water inlet valve] when the ice maker test switch is operated, check the wiring connection to the valve (location is shown in the link - this IS for your model). If it seems OK then on p.50 it shows to to remove the ice maker so that you can check if there is water in the tray or not.
+
If you can't hear the [link|https://www.partselect.com/PS8737459-Samsung-DA62-04027A-Water-Inlet-Valve.htm?SourceCode=21&SearchTerm=RF28HFEDBSR&ModelNum=RF28HFEDBSR|ice water inlet valve] when the ice maker test switch is operated, check the wiring connection to the valve (location is shown in the link - this IS for your model). It looks like there are 3 valves, so it will be a main supply, dispenser supply and ice maker supply. To get water to flow the main has to be operated as well as the desired individual valve i.e. for dispenser it is main and dispenser valves, for ice maker it is main and ice valves. As the dispenser is working obviously the main is as well. So you need to work out which one is the ice water valve
+
+
If it seems OK then on p.50 it shows to to remove the ice maker so that you can check if there is water in the tray or not.
Also on p.60 it shows how to get into the diagnostic tests mode which may help.
Sorry I can't help further and especially if the manual isn't relevant to your model
Hi @wiccapheonix
I can't find a service manual for your model but here's the start of the [https://www.manualslib.com/manual/1228428/Samsung-Rf28hmedbsr.html?page=97#manual|ice maker troubleshooting flowcharts] that may help.
I couldn't find the service manual for your particular model but it is a RF28H series so hopefully it may be close enough to be of some help.
If you can't hear the [https://www.partselect.com/PS8737459-Samsung-DA62-04027A-Water-Inlet-Valve.htm?SourceCode=21&SearchTerm=RF28HFEDBSR&ModelNum=RF28HFEDBSR|ice water inlet valve] when the ice maker test switch is operated, check the wiring connection to the valve (location is shown in the link - this IS for your model). If it seems OK then on p.50 it shows to to remove the ice maker so that you can check if there is water in the tray or not.
Also on p.60 it shows how to get into the diagnostic tests mode which may help.
Sorry I can't help further and especially if the manual isn't relevant to your model