Huk 13, 2021
crwdns2934243:0crwdne2934243:0
mike
crwdns2934249:0crwdne2934249:0:
Are you sure you have the screwdriver in the correct hole? One for 45rpm and one for 33 rpm. - I just spotted this video on speed adjustment: + I just spotted this video on speed adjustment for that model : https://www.youtube.com/watch?v=puq6nghhgik + + I don’t have a service manual but I suppose it could have a digiPOT: + + https://components101.com/articles/how-digital-potentiometer-works-and-how-to-use-it
crwdns2915684:0crwdne2915684:0:
open
Huk 13, 2021
crwdns2934245:0crwdne2934245:0
mike
crwdns2934249:0crwdne2934249:0:
- If that is the case just replace the potentiometer. Value should be marked on the malfunctioning one. They don’t cost much. - - Take a photo of it before you touch anything so you get the positioning correct. - - You will need a soldering iron. + Are you sure you have the screwdriver in the correct hole? One for 45rpm and one for 33 rpm. I just spotted this video on speed adjustment: https://www.youtube.com/watch?v=puq6nghhgik
crwdns2915684:0crwdne2915684:0:
open
Huk 13, 2021
crwdns2934245:0crwdne2934245:0
mike
crwdns2934249:0crwdne2934249:0:
If that is the case just replace the potentiometer. Value should be marked on the malfunctioning one. They don’t cost much. Take a photo of it before you touch anything so you get the positioning correct. You will need a soldering iron. + + I just spotted this video on speed adjustment: + + https://www.youtube.com/watch?v=puq6nghhgik
crwdns2915684:0crwdne2915684:0:
open
Huk 13, 2021
crwdns2934245:0crwdne2934245:0
mike
crwdns2934249:0crwdne2934249:0:
- Just replace the potentiometer. Value should be marked on the malfunctioning one.+ If that is the case just replace the potentiometer. Value should be marked on the malfunctioning one. They don’t cost much. Take a photo of it before you touch anything so you get the positioning correct. You will need a soldering iron.
crwdns2915684:0crwdne2915684:0:
open
Huk 13, 2021
crwdns2934241:0crwdne2934241:0
mike
crwdns2934249:0crwdne2934249:0:
Just replace the potentiometer. Value should be marked on the malfunctioning one.
Take a photo of it before you touch anything so you get the positioning correct.
You will need a soldering iron.
crwdns2915684:0crwdne2915684:0:
open