2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
[image|2510710]
[image|2510709]
[image|2510708]
[image|2510707]
[image|2510712]
[image|2510711]
[image|2511255]
[image|2511254]
[image|2511591]
[image|2511592]
*****UPDATE:
This is really a mindf**ck
[image|2512578]
WOB/10 BCP56 Does this have anything to do with voltage going into the unit?
ok so compared known good with bad.
Diode mode
Good / old
Pin 1 - 0.622v - 0.626v
Pin 2 - 1.154v - 1.160v
Pin 3 - 0.034v - 0.034v
Pin 4 - 1.153v - 1.158v
Continuity Mode
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 22.5Ohms - 22.4Ohms
Pin 4 - OL - OL
[image|2512579]
This above is some sort of diode
Diode mode
bottom
-
Good/R531A old/R527A Does this have anything to do with voltage going into the unit?
+
Good/R531A / old/R527A Does this have anything to do with voltage going into the unit? Could this be why it’s not powering on?
+
+
Good -/ Old
1.598v - 2.690v
top
OL - OL
Continuity mode
Good/R531A old/R527A
TOP
OL BEEP - OL NO BEEP
[image|2512576]
4275G RB 032 Does this control voltage going into the unit?
Continuity Mode
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 0.6 Ohms Beep - 1.5 Ohms Beep
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.6 Ohms Beep - 1.5 Ohms Beep
Diode Mode
Good / old
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 2 -0.673v - 0.671v
Pin 3 - 0.002v - 0.002v
Pin 4 - 0.647v - 0.645v
Pin 5 - 0.447v - 0.656v
Pin 6 - 0.002v - 0.002v
Ohms
Good -/ Old
Pin OL - OL
Pin OL - OL
Pin 3 - 0.7 Ohms - 0.5 Ohms
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.7 Ohms - 0.7 Ohms
[image|2512575]
42765G RC 027 Does this control voltage going into the unit?
Continuity Mode
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
Diode Mode
Good / old
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 2 -1.414v - 2.181v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 3 - 0.002v - 0.002v
Pin 4 - OL - OL
Pin 5 - 0.538v - 0.580v
Pin 6 - 0.001v - 0.002v
Ohms
Good - / Old
Pin OL - OL
Pin OL - OL
Pin 3 - 0.8 Ohms - 0.4 Ohms
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.8 Ohms - 0.4 Ohms
I think I’m gonna go jump off the balcony pppffffttttt :"-(
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
[image|2510710]
[image|2510709]
[image|2510708]
[image|2510707]
[image|2510712]
[image|2510711]
[image|2511255]
[image|2511254]
[image|2511591]
[image|2511592]
*****UPDATE:
This is really a mindf**ck
[image|2512578]
WOB/10 BCP56 Does this have anything to do with voltage going into the unit?
ok so compared known good with bad.
Diode mode
-
Good old
+
Good / old
Pin 1 - 0.622v - 0.626v
Pin 2 - 1.154v - 1.160v
Pin 3 - 0.034v - 0.034v
Pin 4 - 1.153v - 1.158v
Continuity Mode
-
Good old
+
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 22.5Ohms - 22.4Ohms
Pin 4 - OL - OL
[image|2512579]
This above is some sort of diode
Diode mode
bottom
Good/R531A old/R527A Does this have anything to do with voltage going into the unit?
1.598v - 2.690v
top
OL - OL
Continuity mode
Good/R531A old/R527A
TOP
OL BEEP - OL NO BEEP
[image|2512576]
4275G RB 032 Does this control voltage going into the unit?
Continuity Mode
-
Good old
+
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 0.6 Ohms Beep - 1.5 Ohms Beep
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.6 Ohms Beep - 1.5 Ohms Beep
Diode Mode
-
Good old
+
Good / old
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 2 -0.673v - 0.671v
Pin 3 - 0.002v - 0.002v
Pin 4 - 0.647v - 0.645v
Pin 5 - 0.447v - 0.656v
Pin 6 - 0.002v - 0.002v
Ohms
-
Good - Old
+
Good -/ Old
Pin OL - OL
Pin OL - OL
Pin 3 - 0.7 Ohms - 0.5 Ohms
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.7 Ohms - 0.7 Ohms
[image|2512575]
42765G RC 027 Does this control voltage going into the unit?
Continuity Mode
-
Good old
+
Good / old
Pin 1 - OL - OL
Pin 2 - OL - OL
Pin 3 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
Diode Mode
-
Good old
+
Good / old
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 2 -1.414v - 2.181v (WHY IS THERE SUCH A DIFFERENCE HERE????)
Pin 3 - 0.002v - 0.002v
Pin 4 - OL - OL
Pin 5 - 0.538v - 0.580v
Pin 6 - 0.001v - 0.002v
Ohms
-
Good - Old
+
Good - / Old
Pin OL - OL
Pin OL - OL
Pin 3 - 0.8 Ohms - 0.4 Ohms
Pin 4 - OL - OL
Pin 5 - OL - OL
Pin 6 - 0.8 Ohms - 0.4 Ohms
I think I’m gonna go jump off the balcony pppffffttttt :"-(
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
[image|2510710]
[image|2510709]
[image|2510708]
[image|2510707]
[image|2510712]
[image|2510711]
[image|2511255]
[image|2511254]
[image|2511591]
[image|2511592]
+
+
*****UPDATE:
+
+
This is really a mindf**ck
+
+
[image|2512578]
+
+
WOB/10 BCP56 Does this have anything to do with voltage going into the unit?
+
+
ok so compared known good with bad.
+
+
Diode mode
+
+
Good old
+
+
Pin 1 - 0.622v - 0.626v
+
+
Pin 2 - 1.154v - 1.160v
+
+
Pin 3 - 0.034v - 0.034v
+
+
Pin 4 - 1.153v - 1.158v
+
+
Continuity Mode
+
+
Good old
+
+
Pin 1 - OL - OL
+
+
Pin 2 - OL - OL
+
+
Pin 3 - 22.5Ohms - 22.4Ohms
+
+
Pin 4 - OL - OL
+
+
[image|2512579]
+
+
This above is some sort of diode
+
+
Diode mode
+
+
bottom
+
+
Good/R531A old/R527A Does this have anything to do with voltage going into the unit?
+
+
1.598v - 2.690v
+
+
top
+
+
OL - OL
+
+
Continuity mode
+
+
Good/R531A old/R527A
+
+
TOP
+
+
OL BEEP - OL NO BEEP
+
+
[image|2512576]
+
+
4275G RB 032 Does this control voltage going into the unit?
+
+
Continuity Mode
+
+
Good old
+
+
Pin 1 - OL - OL
+
+
Pin 2 - OL - OL
+
+
Pin 3 - 0.6 Ohms Beep - 1.5 Ohms Beep
+
+
Pin 4 - OL - OL
+
+
Pin 5 - OL - OL
+
+
Pin 6 - 0.6 Ohms Beep - 1.5 Ohms Beep
+
+
Diode Mode
+
+
Good old
+
+
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
+
+
Pin 2 -0.673v - 0.671v
+
+
Pin 3 - 0.002v - 0.002v
+
+
Pin 4 - 0.647v - 0.645v
+
+
Pin 5 - 0.447v - 0.656v
+
+
Pin 6 - 0.002v - 0.002v
+
+
Ohms
+
+
Good - Old
+
+
Pin OL - OL
+
+
Pin OL - OL
+
+
Pin 3 - 0.7 Ohms - 0.5 Ohms
+
+
Pin 4 - OL - OL
+
+
Pin 5 - OL - OL
+
+
Pin 6 - 0.7 Ohms - 0.7 Ohms
+
+
[image|2512575]
+
+
42765G RC 027 Does this control voltage going into the unit?
+
+
Continuity Mode
+
+
Good old
+
+
Pin 1 - OL - OL
+
+
Pin 2 - OL - OL
+
+
Pin 3 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
+
+
Pin 4 - OL - OL
+
+
Pin 5 - OL - OL
+
+
Pin 6 - 0.5 Ohms - 1.4 Ohms (WHY SUCH A DIFFERENCE HERE?????)
+
+
Diode Mode
+
+
Good old
+
+
Pin 1 - 1.6v - 2.693v (WHY IS THERE SUCH A DIFFERENCE HERE????)
+
+
Pin 2 -1.414v - 2.181v (WHY IS THERE SUCH A DIFFERENCE HERE????)
+
+
Pin 3 - 0.002v - 0.002v
+
+
Pin 4 - OL - OL
+
+
Pin 5 - 0.538v - 0.580v
+
+
Pin 6 - 0.001v - 0.002v
+
+
Ohms
+
+
Good - Old
+
+
Pin OL - OL
+
+
Pin OL - OL
+
+
Pin 3 - 0.8 Ohms - 0.4 Ohms
+
+
Pin 4 - OL - OL
+
+
Pin 5 - OL - OL
+
+
Pin 6 - 0.8 Ohms - 0.4 Ohms
+
+
I think I’m gonna go jump off the balcony pppffffttttt :"-(
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
Instrument cluster board component identification help
+
2010VW Golf mk6 Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)
Instrument cluster board component identification help
crwdns2934249:0crwdne2934249:0:
Hi Guys,
A bit frustrated, having trouble finding schematics for 2010 vw golf mk6 instrument cluster. Not powering on at all so trying to find fault. Need help identifying some components.
This component has numbers printed on top: R527A and some sort of symbol like a C with lines through it. What is it? How do I find it on Digikey? Photo bellow:
[image|2510475]
Here is a photo of the whole board:
[image|2510476]
Trying to follow the pin thats supposed to supply power to it. It seems I am not getting a reading at all in diode mode. There is something wrong along that line. Finding it really hard with no schematics or board-view to help follow it along.
If anyone has any advise or prior repair knowledge of a newer no power instrument cluster repair would be more than appreciated. Am really stuck. Here is a photo of the other side of the board:
[image|2510486]
Also could not find this mosfet?? Marking on top is 24C64WQ K022P
[image|2510488]
Like I said main problem is no power at all
Any help? Thanks everyone ;) ( would be so much easier with board-view)