Does this happen on both hot and cold water cycles?
Does the machine display an ''OE'' error code?
It appears as though the washer is not sensing the water level correctly when filling.
-
Here’s the section from the [https://www.manualslib.com/manual/1074626/Samsung-B1445avgw-Ylw.html?page=24#manual|service manual]that shows how to get into the diagnostic test mode for the washer.
+
The water should stop filling at 2/3rd the level of the door and drain automatically if there is a problem with the water supply valve circuit.
-
Try running the diagnostics and check what it shows.
+
Here’s the [https://www.manualslib.com/manual/1074626/Samsung-B1445avgw-Ylw.html?page=1#manual|service manual] for the washer that may help.
Hi @beloha ,
Does the machine display an ''OE'' error code?
It appears as though the washer is not sensing the water level correctly when filling.
Here’s the section from the [https://www.manualslib.com/manual/1074626/Samsung-B1445avgw-Ylw.html?page=24#manual|service manual] that shows how to get into the diagnostic test mode for the washer.
Try running the diagnostics and check what it shows.