I am re-posting what I found from '''Jason @squeeby,''' that works.
I’ve got WHIRLPOOL ''''''Gold Quiet Partner IV MN: GU2475XTVB0
His Fix Resolved My Problem, but in the meantime I ordered the;
Dishwasher control panel PN:WPW10175239. This part replaces PN:W10164388.
I’m not sure what caused the error, I’ve tried resetting several times.
I always waited till all lights go off. With the door closed, lights off,
* I opened the door
* pressed normal/heated dry/normal/heated dry & shut door
* All lights blinked, but did not go into the diagnostic, it then illuminated Drain/Cancel light and began draining
* When I attempted to start, the same crazy blinking began.
As Final Resolve:
* I turned the breaker off
* Opened up dishwasher door and disassembled to gain access to control panel
* Disconnected the 14 or 16 pin ribbon cable
* Turned the power on (Breaker)
* With the power on, reconnected the ribbon cable
* Reassembled and tested normal wash 3x, all good
I haven’t gone through all the other settings yet, but I will, seems to indicate possibly a control panel issue, but I can now wash my dishes. So Far, So Good!