The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant. All Xiamio phones have a [https://www.gearbest.com/blog/how-to/does-the-xiaomi-mi-10-or-mi-10-pro-water-proofing-12277|P2i rating] which makes them “splashproof” but no IP (ingress protection) rating as such.
+
The phone is water resistant, not waterproof. All Xiamio phones have a [link|https://www.gearbest.com/blog/how-to/does-the-xiaomi-mi-10-or-mi-10-pro-water-proofing-12277|P2i rating] which makes them “splashproof” but no IP (ingress protection) rating as such.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly if carried in clothing, small cracks in case, being dropped etc.
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was actually working OK when they told you that it was the systemboard that was the problem?
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard somehow.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
+
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant. All Xiamio phones have a [https://www.gearbest.com/blog/how-to/does-the-xiaomi-mi-10-or-mi-10-pro-water-proofing-12277|P2i rating] which makes them “splashproof” but no IP (ingress protection) rating as such.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly if carried in clothing, small cracks in case, being dropped etc.
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was actually working OK when they told you that it was the systemboard that was the problem?
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard somehow.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly if carried in clothing, small cracks in case, being dropped etc.
-
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was OK when they told you that it was the systemboard that was the problem?
+
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was actually working OK when they told you that it was the systemboard that was the problem?
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard somehow.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
-
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, small cracks in case, being dropped etc.
+
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly if carried in clothing, small cracks in case, being dropped etc.
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was OK when they told you that it was the systemboard that was the problem?
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard somehow.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, small cracks in case, being dropped etc.
+
+
Given that you have replaced the systemboard, you may have to change the display assembly to know where the problem is now. Did the repairers check if the display assembly was OK when they told you that it was the systemboard that was the problem?
+
+
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard somehow.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, small cracks in case, being dropped etc.
-
-
With the phone switched on, try shining a torch at an angle close to the screen and check if you can see images at all. They will be very faint, so try this in a darkened room to help see them if they are there.
-
-
If you can see them then there is a backlight problem either in the screen or on the systemboard. Since you have changed the systemboard and it still doesn’t work, then you may have to change the display assembly.
-
-
If you can’t see any images then you may still have to change the display assembly to know where the problem is.
-
-
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is water resistant.
+
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is even water resistant.
-
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, cracks in case, being dropped etc.
+
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, small cracks in case, being dropped etc.
With the phone switched on, try shining a torch at an angle close to the screen and check if you can see images at all. They will be very faint, so try this in a darkened room to help see them if they are there.
If you can see them then there is a backlight problem either in the screen or on the systemboard. Since you have changed the systemboard and it still doesn’t work, then you may have to change the display assembly.
+
+
If you can’t see any images then you may still have to change the display assembly to know where the problem is.
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard.
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is water resistant.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, cracks in case, being dropped etc.
-
With the phone switched on, try shining a torch at an angle close to the screen and check if you can see images at all.
+
With the phone switched on, try shining a torch at an angle close to the screen and check if you can see images at all. They will be very faint, so try this in a darkened room to help see them if they are there.
-
If you can then there is a backlight problem either in the screen or on the systemboard. Since you have changed the systemboard and it still doesn’t work, then you may have to change the display assembly.
+
If you can see them then there is a backlight problem either in the screen or on the systemboard. Since you have changed the systemboard and it still doesn’t work, then you may have to change the display assembly.
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard.
Hi,
The phone is water resistant, not waterproof. Although the manufacturer doesn’t officially say that it is water resistant.
Normal user handling over time may have caused it to become even less water resistant than what it was when it left the factory e.g. bending slightly in clothing, cracks in case, being dropped etc.
With the phone switched on, try shining a torch at an angle close to the screen and check if you can see images at all.
If you can then there is a backlight problem either in the screen or on the systemboard. Since you have changed the systemboard and it still doesn’t work, then you may have to change the display assembly.
Hopefully if the problem is in the display assembly it hasn’t now also damaged the new systemboard.