Sometimes the film can get stuck/jammed up inside, the motor will turn and the pictures will take, but they won’t eject due to the polaroid film being crumbled/stuck. I recommend taking it apart, since the motor could start to overheat due to the grinding of it trying to push out the film. There aren’t too many repair guides out there regarding this issue hopefully you find this one helpful: https://www.lomography.com/magazine/154251-lomokino-shutter-repair-and-maintenance
-
-
Also I would appreciate if you’d check out my animatronic problem: [post|695357]
Sometimes the film can get stuck/jammed up inside, the motor will turn and the pictures will take, but they won’t eject due to the polaroid film being crumbled/stuck. I recommend taking it apart, since the motor could start to overheat due to the grinding of it trying to push out the film. There aren’t too many repair guides out there hopefully you find this one helpful: https://www.lomography.com/magazine/154251-lomokino-shutter-repair-and-maintenance
+
Sometimes the film can get stuck/jammed up inside, the motor will turn and the pictures will take, but they won’t eject due to the polaroid film being crumbled/stuck. I recommend taking it apart, since the motor could start to overheat due to the grinding of it trying to push out the film. There aren’t too many repair guides out there regarding this issue hopefully you find this one helpful: https://www.lomography.com/magazine/154251-lomokino-shutter-repair-and-maintenance
Also I would appreciate if you’d check out my animatronic problem: [post|695357]
Sometimes the film can get stuck/jammed up inside, the motor will turn and the pictures will take, but they won’t eject due to the polaroid film being crumbled/stuck. I recommend taking it apart, since the motor could start to overheat due to the grinding of it trying to push out the film. There aren’t too many repair guides out there hopefully you find this one helpful: https://www.lomography.com/magazine/154251-lomokino-shutter-repair-and-maintenance
Also I would appreciate if you’d check out my animatronic problem: [post|695357]