If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
-
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need to havesmd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
+
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need to have smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] are available online, (supplier example only to show part and cost). There may be other suppliers that suit you better. Just search for ''HMDX Jam micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
-
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
+
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need to havesmd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] are available online, (supplier example only to show part and cost). There may be other suppliers that suit you better. Just search for ''HMDX Jam micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
-
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX Jam micro USB charging port connector'' to get results.
+
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] are available online, (supplier example only to show part and cost). There may be other suppliers that suit you better. Just search for ''HMDX Jam micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
-
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.
+
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX Jam micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
-
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair for the charge port.
+
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair to the charge port i.e. re-solder original or unsolder original and solder in replacement.
[image|2418162]
(click on image to enlarge for better viewing.
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair for the charge port.
[image|2418162]
(click on image to enlarge for better viewing.
-
If the USB connector is faulty and not just loose from the board, compatible [https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost). There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.
+
If the USB connector is faulty and not just loose from the board, compatible [link|https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost) are available online. There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.
Hi, [br]
If the micro USB charge port is just loose or it is broken, it can either be re-soldered to the board or replaced.
Here’s the [guide|36903] guide that may help.
I realize that it is for the battery replacement and not for the charge port but it will help you to gain access the charge port.
Here’s an image taken from Step.4 of the guide that shows the charge port. The board will have to be removed from the speaker case and you will need smd (surface mount device) soldering tools and skills to do the repair for the charge port.
[image|2418162]
(click on image to enlarge for better viewing.
If the USB connector is faulty and not just loose from the board, compatible [https://www.ebay.com/itm/112251851997|replacement micro USB connectors] (supplier example only to show part and cost). There may be other suppliers that suit you better. Just search for ''HMDX micro USB charging port connector'' to get results.